Go to Ultimatecarpage.com

Car search: Quick Advanced 
 f1 Ultimatecarpage.com  > Cars by brand  > Italy  > Maserati
Racing cars  > Formula 1
     250F Lightweight
Cars statistics: 4022 cars, 388 makes, 28501 images; Events statistics: 168 reports, 29799 images; Forum statistics: 78,020 members, 38,900 topics; more...


Maserati 250F Lightweight

Maserati 250F Lightweight Maserati 250F Lightweight Maserati 250F Lightweight Maserati 250F Lightweight Maserati 250F Lightweight Maserati 250F Lightweight
Maserati 250F Lightweight Maserati 250F Lightweight Maserati 250F Lightweight Maserati 250F Lightweight Maserati 250F Lightweight Maserati 250F Lightweight
Maserati 250F Lightweight Maserati 250F Lightweight Maserati 250F Lightweight Maserati 250F Lightweight Maserati 250F Lightweight Maserati 250F Lightweight
Click here to save all images    Image credits: Wouter Melissen 

Click here to download printer friendly version Juan Manuel Fangio
Legendary drivers are usually most vividly remembered by their finest races; Nuvolari's 1935 Nürburgring victory, Moss' 1960 Monaco win, Villeneuve's epic 1979 Dijon battle and Senna's rain-mastery at Donnington in 1993. Many of these performances are over-shadowed by the incredible feat pulled by Juan Manuel Fangio in the 1957 Nürburgring Grand Prix. His ride for that momentous occasion was the Maserati 250F, considered by many as the definitive front engined Grand Prix racer.

Designed for the 2.5 litre Formula 1 regulations new for the 1954 season, the 250F followed the lines of Maserati's Formula 2 racers of 1952 and 1953. A simple tubular frame carried the suspension, aluminium body panels and engine. The front suspension was independent by wishbones and coil springs. The rear used a DeDion type axle, made popular by the front engined Mercedes-Benz Grand Prix racers of the 1930s. It offered similar rigidity as a beam axle, but drastically lowered the unsprung weight, greatly benefitting the cars handling and performance. All in all, this setup was far from revolutionary, but chassis design was not the engineers' top priority in the 1950's. Rather, their focus was primarily on the design of the engine.

Back to natural aspiration
From the 1920s, Grand Prix engine design focussed almost solely on blown engines. Development reached a peak in 1951, with Alfa Romeo's 1.5 litre 159 F1 racer, powered by an engine which was good for a whopping 260 bhp / litre. The cost of developing and maintaining these high performance engines had spiraled, forcing many teams to pull out. Due to a complete lack of competitors, the 1952 and 1953 Driver's World Championship was run under Formula 2 rules, rather than the F1 rules. These Formula 2 racers were powered by 2 litre, unblown engines. These regulations were taken as a base for the new Formula 1 engine rules, putting normally aspirated engines in the limelight again for the first time in almost 3 decades. Fuel Injection was also tried during 1956 but rarely raced.

In its design the six cylinder 250F engine followed the lines of the A6 Formula 2 engine. Both bore and stroke were increased, however, to decrease piston speed the bore was increased slightly more than the stroke. Development work had proven that proper breathing was essential to get the best performance out of the engine. In the past this wasn't much of a concern, the blowers pretty much took car of that. The three twin-choke Weber Carburetors were fitted with small intake trumpets; even the length of these influenced the performance of the twin spark engine. Early in 1954 it produced a little under 100 bhp / litre at 240bhp, but by 1957 the 100 bhp / litre mark was passed with peak power at 270 bhp.

A born winner
Performance of the 250F in its first two races was better than anyone at Maserati could have imagined. Both races were won by Juan Manuel Fangio. However, before the third European race, Fangio left Maserati to race for the newly formed Mercedes-Benz Grand Prix team. The 250F was not able to match the outright performance of of the Mercedes-Benz and its drivers. Fangio and Moss dominated the 1954 and 1955 season, with Fangio picking up the title both years. After Mercedes-Benz' withdrawal Fangio moved to Ferrari, to race the Jano designed Lancia/Ferrari D50. With the ingenious D50, the Master scored a third title in a row. Although the 250F was not a top contender in those years, it was a popular car on the grid, with many privateers racing them.

As mentioned before, the 250F was revamped for the 1957 season. In addition to the engine modifications the chassis was also drastically revised. More but smaller diameter tubing was used, increasing the rigidity and lowering the weight. The new machines were dubbed the 'T2' or 'Lightweight' and were readied for the 1957 season. Subject of constant development had always been the aluminium single-seater body, which was now lower and sleeker than ever before. Discontent at Ferrari, Fangio returned to Maserati where he found the completely revamped 250F. Pitched against Ferraris and Vanwalls, driven by very talented drives like Moss, Collins and Hawthorn, Fangio showcased once more what the 250F was capable of. With his characteristic four wheel drifts, 'The Master' piloted the 250F to four victories and his fifth driver's title.

'57 Nürburgring Grand Prix
Fangio's most notable drive was his amazing Nürburgring victory. Halfway through the race Fangio was almost a minute adrift of Collins and Hawthorn in the leading Ferraris. Collins was flying, breaking Fangio's lap record set earlier in the race. Fangio then recorded a series of laps that took most people's breath away and more importantly seconds from Collins' lead. Breaking the lap record lap after lap (he broke the lap record ten times in 22 laps), Fangio gained as much as 1 second per mile on lap 15. On lap 18 he recorded the first 90 mph lap time and by the end of the race he was close to a 92 mph lap time. With two laps to go the large lead was gone and Fangio had charged past both Ferraris to record his finest victory. A victory that has added a lot to both his and the 250F's legend, even though he has been much more successful with the Mercedes-Benz racers Fangio will forever be connected with the 250F. The best balanced of all front engined Grand Prix racers perfectly suited Fangio's high speed four wheel drifts.

Maserati 250F Lightweight - 2529
Featured above is Juan Manuel Fangio's 1957 Nürburgring Grand Prix winning Maserati 250F Lightweight with the serial number 2529. It was the third of three Lightweight cars constructed late in 1956 for the upcoming season. There were two more T2 chassis built but these were fitted with a V12 engine. Fangio also drove the Nürburgring winning machine to victory in the French Grand Prix at Rouen. Maserati withdrew from racing at the end of the year and '2529' was sold to Giorgio Scarlatti and later Joakim Bonnier who raced it with little success for several seasons. Since its retirement from racing '2529' has been preserved and is generally considered to be the most original of all surviving 250Fs. That, combined with its Nürburgring win makes it the most important Maserati racing car in existence today. In 2008 Swiss car dealer Lukas Huni had the privilege of showing the priceless machine at Retromobile and driving it at the Goodwood Festival of Speed.

Article by Wouter Melissen, last updated on February 05, 2009

Add your comments on the Maserati 250F Lightweight

     
General specifications
Country of origin Italy
Chassis number 2529
Numbers built 3 Lightweight cars for 1957
Produced in 1957
Predecessor
Successor
Body design Giulio Alfieri for Maserati

Major wins
1957 Argentine Grand Prix (Juan Manuel Fangio in 2529)
1957 Monaco Grand Prix (Juan Manuel Fangio in 2528)
1957 French Grand Prix (Juan Manuel Fangio in 2529)
1957 German Grand Prix (Juan Manuel Fangio in 2529)

Engine
Configuration Twin Spark Straight 6
Location Front, longitudinally mounted
Construction aluminium alloy block and head
Displacement 2.494 liter / 152.2 cu in
Bore / Stroke 84.0 mm (3.3 in) / 75.0 mm (3 in)
Compression 12.0:1
Valvetrain 2 valves / cylinder, DOHC
Fuel feed 3 Weber 45 DCO3 Carburettors
Aspiration Naturally Aspirated

Drivetrain
Chassis/body aluminium body on steel tubular frame
Front suspension wishbones, coil springs, Houdaille hydraulic dampers, anti-roll bar
Rear suspension DeDion axle, transverse leaf spring, Houdaille hydraulic dampers, anti-roll bar
Steering worm gear
Brakes hydraulic drums, all-round
Gearbox 5 speed Manual
Drive Rear wheel drive

Dimensions
Weight 630 kilo / 1388.9 lbs
Length / Width / Height 4050 mm (159.4 in) / 1980 mm (78 in) / 950 mm (37.4 in)
Wheelbase / Track (fr/r) 2280 mm (89.8 in) / 1300 mm (51.2 in) / 1250 mm (49.2 in)

Performance figures
Power 270 bhp / 201 KW @ 8000 rpm
BHP/Liter 108 bhp / liter
Power to weight 0.43 bhp / kg
Top Speed 290 km/h / 180 mph

Resources
Related articles
Useful links


  All Cars - Contact us - Privacy Statement - Top © 1998 - 2010 Ultimatecarpage.com