Ford GTX1

[Vaigra]

Source: Ford Motor Company

What started out a year and a half ago as a sketch on a placemat at a Dearborn Coney Island will be one of the Ford show cars on display at the 2005 Specialty Equipment Market Association (SEMA) show, which opens today in Las Vegas.

Using the 1966 Sebring-winning Ford GTX1 roadster as his inspiration, Kip Ewing, a Ford Special Vehicle Team engineering supervisor, sketched a convertible version of the Ford GT, which he named -- quite appropriately -- the Ford GTX1. "The Ford GT has been an amazing automotive icon that I've had the pleasure to work on," said Ewing. "The X1 project is a great way to answer the question, 'What if?' and utilize the power of SEMA's members in the aftermarket to get it done."

The SEMA show is the premier automotive specialty products trade event in the world. This year, more than 2,000 manufacturers will display their wares in over one million square feet of space at the Las Vegas Convention Center. More than 100,000 trade professionals are expected to attend the show, which is open only to verified industry professionals and media.

Getting his idea accepted as a SEMA project required some creative thinking on Ewing's part.

"Sometimes people have a hard time understanding what you want to accomplish, but if you can show them a three-dimensional representation, it helps to seal the deal," he said.

So Ewing did just that. He took a 1:18 die-cast model of the GT and modified it.

"I cut the roof off and then remodeled the body using typical auto body materials like Bondo. Then I repainted it," he said. "It was a nice visual that I could put on someone's desk."

Ewing's craftiness paid off.

In June, Hau Thai-Tang, director of Ford SVT and Advanced Product Creation, gave Ewing the stamp of approval he needed to do bring his dream to life as a SEMA vehicle.

"I've spent my education between engineering and fine arts, but my career path has been engineering," said Ewing. "To be able to get my design work recognized in a show is something I've longed for my whole life."

One of the most innovative aspects of Ewing's GTX1 is its configurable roof. The roof system consists of four individual hard panels. The panels can be configured as a coupe, t-top, or full convertible. Additionally, the panels are painted in the same Valencia Yellow with Tungsten Silver stripes. So, when the car is configured as a coupe, it doesn't lose any of its design appeal. GTX1 drivers won't get caught in the rain because all four panels can be stored inside the vehicle for easy access.

The Genaddi Design Group, a Wisconsin coachbuilder with experience cutting the roofs off of expensive and exotic cars, was chosen to build the car.

"The Ford GTX1 project is a great example of manufacturers working together with the aftermarket to stretch the boundaries and investigate potential design and product innovation," said Thai-Tang.

Ewing says the project became an all-consuming one.

"I was in Wisconsin every other weekend working on the car with the builder," he said. "We finished the construction at a shop I have in my home. In the last week, I've probably had about 16 hours of sleep because I've been so busy finishing the car."

So, how did he feel when the car was finally finished?

"It's very gratifying to see something that was in your head transfer to paper and then transfer to real life," he said. "But to actually get behind the wheel of it and drive your sketch is just a mind-blowing experience."

When asked to predict how he would feel standing beside the GTX1 at the SEMA show this week Ewing replied, "Tired, but very proud."

[Vaigra]

Ford GTX1 #2

These are the only stats I have at the moment:
Layout: Mid-Engine/RWD
Transmission: 6-Speed Manual
Engine
Type: Supercharged V8
Displacement: 5409 cc
Horsepower: 550 bhp @ 6500 rpm
Torque: 500 lb-ft @ 4500 rpm
Redline: 6500 rpm

[Spastik_Roach]

That looks pretty effing sweet.

[r1ckst4]

oooooh... i would probably cry of happiness if i sit on that car

[McLareN]

I might post a thread in the hide-out with all the 19 full res/quality pics.

Is that OK with you, Vaigra?

[Boomer4ES]

Is it just me or are those the ugliest rims in existence?

[Dino Scuderia]

Yeah, they need to consult the Lambo wheel designer....but the rest is very nice.

[tmnt_ppn]

just say it GT40 convertible.

[car_fiend]

i like it now.
one thing though, what is up with the rims. the rims on this car, as well as the rims on the mini cooper s with john cooper works gp kit have similar style wheels. i like them, but is this the new way rims are going to start to look?
link to the cooper, Mini Cooper S with John Cooper Works GP Kit

[Vaigra]

Originally Posted by McLareN

I might post a thread in the hide-out with all the 19 full res/quality pics.

Is that OK with you, Vaigra?

no problem at all


EDIT: see you've already gone and done it

[The_Canuck]

sweet looking car!

[SolidStradale]

I can't stand the new GT. I saw one auctoned off for $175,000. It's just not worth it. I'd rather have a new Z06. Half the price, Just as much power.