Page 1 of 4 123 ... LastLast
Results 1 to 15 of 49

Thread: Solid Aluminium Engine Blocks

  1. #1
    Join Date
    Jun 2005
    Location
    Scotland, UK
    Posts
    1,163

    Solid Aluminium Engine Blocks

    Many currently designed hyper-sportscars that are designing their engines in-house, choose to ignore conventional construction methods concerning the engine block.

    Caparo and Melling (anyone know other manufacturers?) currently use a solid piece of aluminium and then grind it (is this the right word?) in order to shape it into the final engine block.

    This construction method is used for racing cars, as it provides increased rigidity to weight ratios for the engine block, compared to conventional methods. On the downside, this construction technique cannot be used for mass production as it is really expensive: engine block output per hour is really low.

    Anyone know any more info on this topic? Maybe some links? I googled it but I guess that I am using the wrong terminology as I can't get any results
    Minimising losses can maximise net gains

  2. #2
    Join Date
    Mar 2004
    Location
    Eindhoven, The Netherlands
    Posts
    7,833
    I assume they produce these parts by CNC-cutting them ? Perhaps googling with CNC provides some results.

    For our tiger kitcar we designed a pedal-box. A company specialised in these machines will cut this for us for free (promotion).

  3. #3
    Join Date
    Dec 2003
    Location
    nr Edinburgh, Whisky-soaked Scotland
    Posts
    27,775
    What evidence lightweigh of "hyper" car designs using CNC from billet?

    It's an ideal prototypying tool but is VERY expensive for mass production and can't match casting for complex galleries and stress-reducing xurves. CNC'ing inside a box is very difficult and limited.

    Many heads are CNC'ed because they don't need as complex galleries and less strength.
    But low volume only.

    AFAIK Caparo is currenlty one-off for the T1 ( anbd not sure of block construction ) but MCDs Nemesis was cast blocks.
    Many of the new high-perfornacne compact engines have used bike technology to form the core. eg the Hayebusa cast blocks.

    Would love to see what engines were going to stick with the extra weight of a machined rather than cast block. Got some links pls ?
    Last edited by Matra et Alpine; 01-31-2007 at 02:30 PM.
    "A woman without curves is like a road without bends, you might get to your destination quicker but the ride is boring as hell'

  4. #4
    Join Date
    Jun 2005
    Location
    Scotland, UK
    Posts
    1,163
    The info on the Hellcat was from
    http://www.pistonheads.com/news/defa...?storyId=15791

    The info about Caparo was from R&D magazine, Issue 14.

    Thx about the CNC info though. Maybe I will find more info on the topic
    Minimising losses can maximise net gains

  5. #5
    Join Date
    Apr 2003
    Posts
    5,456
    most blocks, even F1 ones, are usually casted then post machined. Casting method these days can get relatively complex feature with a reliable degree of accuracy, so there is really not much need to completely mill an engine block from a solid billet....

    waste material is also a concern.....as a solid chunk of aluminum alloy billet would cost quite a bit....


    As said, a prototype may be made from machine billet....but if they are making any quantity at all an inverstment casted block would make far more sense...
    University of Toronto Formula SAE Alumni 2003-2007
    Formula Student Championship 2003, 2005, 2006
    www.fsae.utoronto.ca

  6. #6
    Join Date
    Mar 2005
    Posts
    1,508
    I don’t know about this specific company but I have seen machined engine blocks. As others have noted there are issues such as machining inside the block and cost. Cost is a bit of a mixed bag. Assuming we can machine the blocks, it is cheaper to machine the block than create the casting then machine it IF we intended to make a very small number of blocks. The blanks for the casting are expensive and take time to produce. However, it doesn’t take long to hit that point where the extra investment up front becomes cost effective.
    Now, speaking from the gas turbine engine field there are generally 4 ways you might make something (or a combination of those ways).

    You can cast it. Casting gives you a near finished shape that generally only needs limited machine work. However, castings are relatively week. The metal from a casting is generally not as strong as other methods. To get a given amount of strength you need to make the casting ticker which adds weight. Also, casting produces metal that is less consistent than other methods. A 4mm wall in one part of the motor may be stronger than a similar 4mm wall some place else in that same block. This has to do with material properties in a casting. Early aluminum street car blocks were almost as heavy as iron blocks because the casting process was so variable. In order to guarantee strength the blocks were thicker than optimal. Casting tooling cost is expensive. In production parts casting is typically the cheapest if not always most material efficient way to make a part. Note that car uprights are cast.

    You can forge it. Forging, like casting gives you a part that is near net shape but it can’t do the complex shapes that casting gives. Forged metal is stronger and more consistent in material property than casting. Thus forged parts can be thinner and yet stronger than cast parts. This works well for simple shaped parts like connecting rods. I know some jet engine “blocks” include forged parts. I can’t see anyone making a complete block from a forged part. Tooling is expensive and parts take longer to make than with casting.

    You can machine it from billet. Like forging, billet stock will generally have very consistent and good material properties. The problem is you have to do LOTS of cutting and waist lots of material. However, sometimes this is the best way. I know some race cars use uprights machined from billet because the tooling cost are just about nothing which is important when making a run of 10-20 parts. It’s also very easy to make changes to the design because there is really no tooling, just change some code.

    You can fabricate it. I don’t know of any fabricated modern piston engines but some of the very early motors were made from sheet and other parts that were assembled and welded together. Many race car parts including F1 uprights are actually welded assemblies of sheet metal. Many jet engines “blocks” are actually made from a combination of castings, forgings, machined parts and sheet metal all welded together. Sheet metal is typically going to give you VERY consistent material properties and great strength to weight ratios. It allows for delicate, thin walled parts that act like little unibody structures. Tooling costs are low, just some assembly jigs. Material costs are very low but assembly time is quite high and is generally all hand labor rather than machine time.

  7. #7
    Join Date
    Dec 2003
    Location
    nr Edinburgh, Whisky-soaked Scotland
    Posts
    27,775
    CULVER Modern casting is much better than it was 10-15 years ago.
    Using CAD a modern casting is easily made up for low volumes using epoxy/sand multiple comopnents assembled and then botom injected.

    With castng it is MUCH easier to include internal fillets and webs to make the cast block much stronger that could be achieved with machining.

    As you noted, the advantage of machining is very low volume flexibility.
    I'll bet when the 100/week Mellings are being assembled in teh US ( that's the plan ) they won't be using a CNC block
    "A woman without curves is like a road without bends, you might get to your destination quicker but the ride is boring as hell'

  8. #8
    Join Date
    Aug 2006
    Location
    Maryland, USA
    Posts
    2,038
    From billet, and it is pretty friggin' costly.

    http://www.tvrcraft.com/

    The NEW Melling V8 32 valve engine

    Specifications:

    Number of Cylinders: 8
    Bore: 95mm
    Stroke: 88mm
    Max V.E: 101%
    Inlet Valve Head Dia: 36mm
    Exhaust Valve Head Dia: 30mm
    Max. Valve Lift: 12mm
    Max. engine rpm: 8000
    Max piston speed: 76.66ft/sec.
    Swept Volume: 4992.11cc
    Max. bhp: 580 @7300rpm
    Max. torque: 438ft/lbs @ 5400rpm
    4 Valves/ Cylinder
    2 Camshafts per bank
    Timing Drive to Camshafts by gears then chain
    Firing order is as 2 four cylinders
    Crankshaft is flat plane
    8 separate throttle bodies
    Full engine management system
    The primary construction will be from solid aluminium billet
    Crankshaft is steel billet
    Conrods are forged steel
    Pistons are forged aluminium

    TVRCraft have the exclusive rights to this engine, and as soon as they arrive one will be fitted into a Cerbera in front of a Tremec TKO transmission, then they will be installed into other selected models in the TVR range and also other vehicles.
    The final stage will be to fit a supercharger and discover the upper limits of this engines capability.
    This unit will be sold by us fitted, or as a crate motor.

    Cost will be approx £14,000

    Based on the provided specs, it sounds as though it works well enough.
    Last edited by Mr.Tiv; 02-04-2007 at 02:06 PM.
    Go n-ithe an cat thu, is go n-ithe an diabhal an cat

    When you go Home, Tell them for us and say 'For your tommorrow, We Gave Our Today.'

  9. #9
    Join Date
    Jul 2005
    Posts
    136
    $28,000 bucks (roughly)for a crate motor? I don't care if it was forged in the fires of hell, there are better options out there.

  10. #10
    Join Date
    Aug 2006
    Location
    Maryland, USA
    Posts
    2,038
    Quote Originally Posted by speednine
    $28,000 bucks (roughly)for a crate motor? I don't care if it was forged in the fires of hell, there are better options out there.
    it's more like 25 000. still, it's ridiculous.
    Go n-ithe an cat thu, is go n-ithe an diabhal an cat

    When you go Home, Tell them for us and say 'For your tommorrow, We Gave Our Today.'

  11. #11
    Join Date
    Dec 2003
    Location
    nr Edinburgh, Whisky-soaked Scotland
    Posts
    27,775
    Quote Originally Posted by Mr.Tiv
    it's more like 25 000. still, it's ridiculous.
    blame the weakness in the dollar
    "A woman without curves is like a road without bends, you might get to your destination quicker but the ride is boring as hell'

  12. #12
    Join Date
    Apr 2003
    Location
    Canada
    Posts
    5,772
    Quote Originally Posted by Mr.Tiv
    it's more like 25 000. still, it's ridiculous.
    Utterly ridiculous. Still cheaper than a similar BMW crate engine, but the LS7 is still the best option. You could have a normally-aspirated 700hp LS7 for far cheaper than this one if you wanted that much power. I'll bet any money that it would be lighter and more compact, too.

  13. #13
    Join Date
    Aug 2006
    Location
    Maryland, USA
    Posts
    2,038
    Quote Originally Posted by Matra et Alpine
    blame the weakness in the dollar
    I blame the strength in the sterling.
    Go n-ithe an cat thu, is go n-ithe an diabhal an cat

    When you go Home, Tell them for us and say 'For your tommorrow, We Gave Our Today.'

  14. #14
    Join Date
    Dec 2003
    Location
    nr Edinburgh, Whisky-soaked Scotland
    Posts
    27,775
    Quote Originally Posted by Mr.Tiv
    I blame the strength in the sterling.
    hmmmm ..... ........ compare across multiple currencies.

    When one of them is going down against the "basket" of currencies then that is the "weak" one.

    Wish it wasn't ... but there again ... time to come over an buy up some of your property for half price
    "A woman without curves is like a road without bends, you might get to your destination quicker but the ride is boring as hell'

  15. #15
    Join Date
    Aug 2006
    Location
    Maryland, USA
    Posts
    2,038
    Quote Originally Posted by Matra et Alpine
    time to come over an buy up some of your property for half price
    I wish I owned property... It sucks being young and nearly broke. On a postive note, my savings sounds much more impressive in pesos.

    I am well aware of the dollar's weakness, I just prefer to deny it sarcasticly. In the future, I will remember smilies to show my lack of seriousness. I like to look at things from an optimistic angle. So I am going to say that the dollar isn't weak, other currencies are just comparatively strong-sounds better, doesn't it?
    Go n-ithe an cat thu, is go n-ithe an diabhal an cat

    When you go Home, Tell them for us and say 'For your tommorrow, We Gave Our Today.'

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. Mercedes-Benz C111 Research Car 1969-1979
    By Matt in forum Matt's Hi-Res Hide-Out
    Replies: 24
    Last Post: 08-22-2021, 06:02 AM
  2. Pushrod or OHC
    By Smokescreen in forum Technical forums
    Replies: 305
    Last Post: 06-05-2012, 05:06 PM
  3. The New UCP Supercar's Engine!
    By Egg Nog in forum Technical forums
    Replies: 77
    Last Post: 12-29-2005, 11:19 AM
  4. BMW Unveils New V10
    By lithuanianmafia in forum General Automotive
    Replies: 10
    Last Post: 09-28-2005, 06:51 AM
  5. International Engine of the year 2005 is.....
    By lukeh in forum Car comparison
    Replies: 20
    Last Post: 06-20-2005, 05:08 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •