Page 2 of 39 FirstFirst 123412 ... LastLast
Results 16 to 30 of 582

Thread: How do you increase Torque?

  1. #16
    Join Date
    May 2004
    Location
    Northern New Jersey
    Posts
    16,602
    How to increase torque:

    ---1. Save spec sheet.
    ---2. Open in Notepad.
    ---3. Edit torque figure.
    ---4. Save and re-open on internet.
    Rockefella says:
    pat's sister is hawt
    David Fiset says:
    so is mine
    David Fiset says:
    do want

  2. #17
    Join Date
    Feb 2004
    Posts
    9,465
    You don't need a big V8 to get shitloads of torque...

    http://www.ultimatecarpage.com/frame...hp&carnum=1956

    406 ft lbs of torque from a 4.0l I6

  3. #18
    Join Date
    Feb 2004
    Location
    State College, PA
    Posts
    908
    correction:
    Power = (Torque * RPM) / 5252

    therefore Torque = (Power * 5252) / RPM ?? i dunno i'm not the greatest at math

    And i think this has been mentioned before but engines with larger strokes normally produce more torque.

    This is because engines with larger strokes cannot get as high of RPM's therefore since you divide by the RPM you get more torque because your dividing by a smaller number? I made that last part up but it makes sense right?
    Last edited by deffenbaugh03; 07-29-2005 at 07:45 PM.

  4. #19
    Join Date
    May 2004
    Location
    Texas, USA
    Posts
    813
    just get 1 of'em diesel engines from big rigs(18 wheelers, whatever else you call), or that diesel engine that is like +-25400L, and like 5 million torque by 102 rpm.
    1993 nissan 240sx hatchback(stock) <<drifter, straight liner, road courser

    "Horsepower is the force that determines how fast you hit the wall. Torque is the force that determines how far you take the wall with you after you hit it."

    "Horsepower sells cars, torque wins races" - Carroll Shelby

    "Real cars don't make power at the front wheels....they lift them."

  5. #20
    Join Date
    Apr 2003
    Location
    Knoxville, TN
    Posts
    1,218
    Quote Originally Posted by deffenbaugh03
    correction:
    Power = (Torque * RPM) / 5252

    therefore Torque = (Power * 5252) / RPM ?? i dunno i'm not the greatest at math

    And i think this has been mentioned before but engines with larger strokes normally produce more torque.

    This is because engines with larger strokes cannot get as high of RPM's therefore since you divide by the RPM you get more torque because your dividing by a smaller number? I made that last part up but it makes sense right?

    Ummm you going to need to give units if you want to use specific numbers... are you using foot pounds or newton meters, and kW or hp? i dont know any of the numbers anyway, but you need to specify your units in any case

  6. #21
    Join Date
    Jun 2005
    Location
    Ozland
    Posts
    912
    Q) How do you get more torque?

    A) Burn more fuel.


    Next question!

  7. #22
    Join Date
    Apr 2003
    Location
    Knoxville, TN
    Posts
    1,218
    Quote Originally Posted by taz_rocks_miami
    The Chevy 572 has 600 ft/lbs of torque, why the hell would anyone want any more?
    Are you stupid or something? To tow a 9000 pounds down a drag strip from a 6000 pounds vehicle full of 7 full size 400 pound adults with a combined 50 pounds of McDonalds between them in under 10 seconds... of course.

    When in America, order more food

  8. #23
    Join Date
    Aug 2004
    Location
    IA
    Posts
    467
    Quote Originally Posted by Jack_Bauer
    Torque isn't a side effect of horse power. If anything I guess you could say the opposite. Horse power is a function of torque.

    Torque is the actual force the engine produces, a twisting force. In many respects it's actually a far more important figure in terms of engine performance than horsepower. Check out http://auto.howstuffworks.com/horsepower1.htm for an explanation of how you get horsepower from torque.
    I disagree. Technically the change in pressure and volume within the piston cylinder is doing work. This work takes place over some time interval and therefore can be equated to a power. The pressure exerts a force on to the piston which generates a torque on the crankshaft.

    So really an engine starts with power and creates torque and rpm.

    Also, I don’t see how torque alone is better than power, in terms of performance figures?
    Last edited by Alastor; 07-30-2005 at 08:31 AM.
    "In theory, theory and practice are the same. In practice, they are not."

  9. #24
    Join Date
    Jul 2005
    Location
    Chicago
    Posts
    322
    wait wait. so after a certain point a car dosent need torque? only hp?

  10. #25
    Join Date
    Jun 2005
    Location
    Ozland
    Posts
    912
    a certain point of what?


    Having high torque means you can cart heavy stuff, like your own ass, up hills.
    Like in truck engines.
    Having high power means you can do the work (make torque) higher in the rev range and thus hit higher top speeds.
    Like in F1 engines.

  11. #26
    Join Date
    Dec 2003
    Location
    nr Edinburgh, Whisky-soaked Scotland
    Posts
    27,775
    Torque ultimatesly comes from the expansion of the gasses in the cylinder.
    So getting more fuel/air mix in their and exploding it more efficiently will increase cylinder pressure and hence torque.
    ASSUMIGN you kep everything else the same.
    Then you increase stroke to make better use of those expanding gases.
    Roughly double the stroke, you'll double the torque.
    BUT when you increase the stroke you dramatically increase the piston dynamnics and inertia as they are travelling twice the distance. THIS then limits the revs and the HP available to you later on when you want speed.

    Engine designers and tuners play with all these limits to provide the best compromise for their market/race needs.
    "A woman without curves is like a road without bends, you might get to your destination quicker but the ride is boring as hell'

  12. #27
    Join Date
    Feb 2004
    Location
    State College, PA
    Posts
    908
    Quote Originally Posted by Bob
    Ummm you going to need to give units if you want to use specific numbers... are you using foot pounds or newton meters, and kW or hp? i dont know any of the numbers anyway, but you need to specify your units in any case
    Sorry it's foot pounds and horsepower

  13. #28
    Join Date
    Feb 2005
    Location
    Location: Location: (UK)
    Posts
    2,496
    Quote Originally Posted by Spastik_Roach
    You don't need a big V8 to get shitloads of torque...

    http://www.ultimatecarpage.com/frame...hp&carnum=1956

    406 ft lbs of torque from a 4.0l I6
    Meh, I drove a 6/7 litre I6 tractor with 180hp and 800nm of torque

  14. #29
    Join Date
    Aug 2004
    Location
    Amsterdam/Heerenveen, The Netherlands
    Posts
    519
    I drove a 420 hp truck, I think that has about a 12 litre engine and like 2000nm of torque :P

    But anyway, if i want torque get a turbo diesel, altho diesels suck in high revs

  15. #30
    Join Date
    Jul 2005
    Location
    Chicago
    Posts
    322
    no, ugh my bad, what i was trying to ask was something like this. What does torque do for a car in a race?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Low End vs High End torque
    By KarateBoy in forum Technical forums
    Replies: 26
    Last Post: 01-30-2009, 01:56 AM
  2. What is horsepower?
    By morepower in forum Technical forums
    Replies: 47
    Last Post: 07-02-2005, 11:35 AM
  3. HP or Torque?
    By jcp123 in forum Car comparison
    Replies: 76
    Last Post: 11-29-2004, 08:15 PM
  4. Torque rant
    By PerfAdv in forum Miscellaneous
    Replies: 5
    Last Post: 10-09-2004, 03:53 AM
  5. Some questions about cars
    By 360evolution in forum Technical forums
    Replies: 17
    Last Post: 12-03-2003, 09:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •