C6 Z06, New Pictures

[Niko_Fx]

Apparently official ones.

[Niko_Fx]

Two more.

[car_fiend]

great pics m8, got ne info on the car... hp, torque, etc...

[McLareN]

Sweet pics.
Love them, continue the good job mate

[Niko_Fx]

Originally Posted by car_fiend

great pics m8, got ne info on the car... hp, torque, etc...

As far as rumors go... 7.0L 500HP, that's about all I know.

[Pimp racer]

Tight man!

[taz_rocks_miami]

Originally Posted by Niko_Fx

As far as rumors go... 7.0L 500HP, that's about all I know.

Does that mean that the Blue Devil will top the 500 HP mark? Great pics BTW Niko

[SIMPLETON]

Accordind to MT it will have a 6.3 liter, frankly, I dont believe them. I would say that car is real considering that there is most people wouldnt splice up more than one pic of the same car. Is there any more pics of the C6-R in the background Niko?

[SIMPLETON]

Anyway, Its still incredibly awesome. Even if it only has a few body mods.

[aNOBLEman]

In RT it says that the ZO6 will have a 7L V-8 with 500HP. It is also supposedly going to have 20in. wheels and tires, larger brakes, a race tuned suspension, and a 6-speed manual gearbox.

[fpv_gtho]

i dont like the front end theyve stuck on it, looks way too Pontiac inspired with that bonnet vent

[Slicks]

Saw that earlier today... Im disapointed on the looks of the car...

Here are some supposed specs:
2,900 lbs

Chassis & Suspension development by Pratt & Miller,
Aluminum Hydroformed frame produced by DANA
- 345/30x19 Rears
- 6 piston Front, 4 piston Rear Brake Calipers
- Cross Drilled (cast and camfered) Rotors (possibly Brembo)

Engine Development by KaTech
To be hand built by new HP Engine Plant

LS7 427ci/ 7.0L. 500HP/500 Ft Lbs (512 HP derated to 500HP)
- 2 OHV (3 OHV not necessary for target HP)
- Raced based CNC ported Aluminum Head with 70cc chambers
- 11.0:1 CR
- 46 mm (1.81") Titanium Intake valve
- 41 mm (1.61") Na filled Exhaust Valve
- 104.8 mm Bore (4.125") , 101.6 mm Stroke (4.0") Aluminum block
- Forgrd Crank
- Forged 6 bolt main Bearing Caps
- Titanium Rods
- Cast Aluminum Flat Top Pistons
- 0.591" Lift Cam (15 mm)
- Dry Sump
- 90 mm Throttle Body on Composite manifold
- Ram Air

[Slicks]

Originally Posted by fpv_gtho

i dont like the front end theyve stuck on it, looks way too Pontiac inspired with that bonnet vent

Pontiac????
What potiac has a hood scoop like that???
try Viper...

[fpv_gtho]

I said Pontiac inspired remember, IMO it has Pontiac Ram Air written all over it

[taz_rocks_miami]

You gotta love the size of those cylinder heads!! Damn I love Big Blocks!!