1 Attachment(s)
Alfa Romeo Giulia GT Junior Zagato 1969-1975
[B]GT 1300 Junior Zagato (1969-72) & GT1600 Junior Zagato (1972-75)[/B]
[I]Tipo: 105.93. Motore: 00530. (1300). Tipo: 115.24. Motore: 00526*S (1600).
[/I]
The GT 1300 Junior Zagato was a limited production two seater coupe with aerodynamic bodywork by Zagato (Ercole Spada) of Milan.[14] The model evoked the earlier, race-oriented Giulietta Sprint Zagatos which featured aluminium bodywork and had a very active competition history. However, the Junior Zagato featured a steel bodyshell with an aluminium bonnet and aluminium doorskins (on the earlier 1300 JZ's). The 1300 JZ was not specifically intended for racing and did not see much use in competition. The 1300 JZ was first seen in public at the Turin Motor Show of 1969. In total 1,108 units were constructed of which 2 were destroyed during production because the bodyshells were not within specification. The 1300 was based on the floorpan, driveline and suspension of the 1300 Spider. However, the floorpan was shortened behind the rear wheels to fit the bodyshell and an Alfa Montreal fueltank was fitted. The last 1300 Junior Zagato was produced in 1972 although in 1974 2 more cars were built according to the records.
In 1972 the 1600 Zagato came out of which 402 units were produced. In this case the floorpan was unaltered from the 1600 Spider, so that the normal fueltank could be left in place. As a consequence, the 1600 Zagato is approximately 100 mm (3.9 in) longer than the 1300 JZ. This can be seen at the back were the sloping roofline runs further back and the backpanel is different and lower. The lower part of the rear bumper features a bulge to make room for the spare tire. The 1600 Zagato has numerous differences when compared to the 1300 Junior Zagato. If you ever see two side by side, have a look at the details. The last 1600 Zagato was produced in 1973 and the cars were sold until 1975
1 Attachment(s)
Alfa Romeo Junior Zagato 2000 Periscopi
Here is one. The periscopi from ´72.
