I picked the Dodge caliber concept for this week's competition. Here's the pic:
http://www.ultimatecarpage.com/forum...chmentid=90492
Good Luck!
I picked the Dodge caliber concept for this week's competition. Here's the pic:
http://www.ultimatecarpage.com/forum...chmentid=90492
Good Luck!
Last edited by johnnynumfiv; 03-02-2005 at 02:03 PM.
"We went to Wnedy's. I had chicken nuggest." ~ Quiggs
Great pic, I think I may enter this one again
"The thunder of 1001bhp would send a sonic boom through his carbon fibre shell, crack it in half and leave a wet puddle on the fancy leather seat."
nice pic, its a bit dark up front, but that can be fixed.
Self confessed boost junkie:)
84' Nissan N12 EXA, E15ET turbo.....with upgraded turbo:)
UCP's biggest Afro on a white man!!!
thats a Caliber not a slingshot. Still a nice pic
Ahh, I corrected it, thanks.Originally Posted by baddabang
"We went to Wnedy's. I had chicken nuggest." ~ Quiggs
Done.
EDIT: shit I think I made it to small
someone forgot to lasso out the windows ...Originally Posted by 85RX7
lol!!!!Originally Posted by 85RX7
the cat and the dog are so awesome!!
halo 2 - november 9
baddabang you have a nice chop there except on the front bumper the air intake doesn't look that good.
My Photography: flickr.com/photos/a-m-photo/
"The best way to predict the future is to invent it."
The color change is a little "thick". The body/panel lines are no longer dark enough and the reflections and depth of the paint are almost entirely gone. The text on the hood seems... off... I don't know, exactly what angle the text is supposed to be at, but it looks kind of akward. When putting text on a surface like that, you really have to think about how much it would be stretched, skewed, etc. With the angle the photo is taken at, the surface the text is on is pretty close to horizontal and parallel to the ground. So, the text should be as well. To give you an idea of what I mean, take a look at the "9" on the hood of this DBR9 I made a while back: http://www.severdesign.com/images/ga...br9_e_race.jpgOriginally Posted by Eric S.
The "HEMI" text should be similarly "flat". The "DAYTONA" text also doesn't seem QUITE right, but it's closer. Also, the black on the hood is a little too dark and reflectionless. Even if it is flat/low gloss paint (which I believe it normally is on Daytonas), it would still have some variation across it and reflect some light. The black on the Daytona stripe looks better.
Other than that, it looks pretty good. Hope this helps some.
--------------
We need more contributions! Mine's pretty much done, but I'll post it later. The poll starts the same time this week as it did last, right?
Last edited by pat_ernzen; 03-04-2005 at 05:06 PM.
www.Desert-Motors.com - mag.Desert-Motors.com
Pat,
Thanks a lot for the tips, I'll try fixing it up before the competition is over
Eric
lol just resize it or chop the neck! It will looks wierd and funny!Originally Posted by 85RX7
Awesome chop man, lol Bore Design.Originally Posted by 6'Bore
You should make a company that does chops and name it Bore Design Corporation. lol You would make much money but it would be a fun job.....
My Photography: flickr.com/photos/a-m-photo/
"The best way to predict the future is to invent it."
There are currently 1 users browsing this thread. (0 members and 1 guests)