Page 1 of 2 12 LastLast
Results 1 to 15 of 30

Thread: NSU Ro 80 1967–1977

  1. #1
    Join Date
    May 2005
    Posts
    2,948

    NSU Ro 80 1967–1977

    The NSU Ro 80 is a four-door, front-engine executive sedan manufactured and marketed by the West German firm NSU from 1967 until 1977.

    Noted for innovative, aerodynamic styling by Claus Luthe and a technologically advanced powertrain, the Ro 80 featured a 84 kW (113 bhp), 995 cc twin-rotor Wankel engine driving the front wheels through a semi-automatic transmission with an innovative vacuum-operated clutch system. Engine dimensions (Comotor units): length 16.22 in. (412 mm); width 13.5 in. (340 mm), height 13.5 in. (340 mm), weight 223 pounds (101 kg). Power 107 hp (80 kW) at 6,500 rpm; torque 137 N⋅m (101 lbf⋅ft) at 3,000 rpm (all figures approximate).

    The Ro 80 was voted Car of the Year for 1968 and 37,398 units were manufactured over a ten-year production run, all in a single generation.

    Running gear
    Other technological features of the Ro 80, aside from the powertrain, were the four-wheel ATE Dunlop disc brakes, which were generally only featured on expensive sports or luxury saloon cars. The front brakes were mounted inboard, reducing the unsprung weight. The suspension was independent on all four wheels, with MacPherson struts at the front and semi-trailing arm suspension at the rear, both of which are space-saving designs commonly used today. Power-assisted ZF rack and pinion steering was used, again foreshadowing more recent designs.

    Transmission
    The car featured an automatic clutch which was commonly described as a three-speed semi-automatic gearbox: there was no clutch pedal, but instead, touching the gear lever knob operated an internal electric switch that operated a vacuum system which disengaged the clutch. The gear lever itself then could be moved through a standard "H-pattern" gate.

    Styling
    The styling, by Claus Luthe who was head of design at NSU and later BMW, was considered very modern at the time; the Ro 80 has been part of many gallery exhibits of modern industrial design. The large glass area foreshadowed the 1970s designs such as Citroën's. The shape was also slippery, with a drag coefficient of 0.355 (very low for the era). This allowed for a top speed of 112 mph (180 km/h). Indeed, comparisons have been drawn between the design of the Ro 80 and the aerodynamic 1982 Audi 100 built in the same factory some 15 years later.

    Interior
    Interior trim combined cloth-covered seats with PVC headlining and a carpeted floor. Leather seats were a factory option, although rarely specified.

    Evolution
    The company's limited resources focused on improving the reliability of the rotary engine, with much attention given to the material used for the three rotor tips (apex seals) for the oval-like epitrochoid-shaped rotor housing that sealed the combustion chambers. A feature of the engine was its willingness to rev quickly and quietly to very high engine speeds, but it was precisely at these high speeds that damage to key engine components occurred: all Ro 80s came with a rev counter, but cars produced after 1971 also came with an "acoustical signal" that warned the driver when the engine was rotating too fast.

    The Ro 80 remained largely unchanged over its ten-year production. From September 1969 the rectangular headlights were replaced with twin halogen units, and air extractor vents appeared on the C-pillar behind the doors. In August 1970 a slightly reshaped plastic grill replaced the metal grill of the early cars, and a minimal facelift in May 1975 saw the final cars getting enlarged rear lights and rubber inserts in the bumpers which increased the car's overall length by 15 mm to 4,795 mm. The placement of the rear license plate was also changed from below the bumper to above it. This resulted in the boot lid lock being repositioned to the rear lip of the boot lid itself, instead of just below it.

    Unreliability
    The car developed an early reputation for unreliability. The Ro 80 engine in particular suffered from construction faults, among many other problems, and some early cars required a rebuilt engine before 50,000 kilometres (31,000 mi), with problems arising as early as 24,000 kilometres (15,000 mi). Originally, the rotor tip seals were made in three pieces, out of the same material. The motor's design caused the center section to wear more quickly at cold starts compared to the other pieces; the worn centerpieces allowed the two other parts of the seal to move, which in turn allowed combustion products to escape the seals. The tip seal centerpiece was then redesigned using ferrotic material, and the problem was entirely resolved. The fact that the rotary engine design had inherently poor fuel economy (typically 13-16 l/100 km) and a poor understanding of the Wankel engine by dealers and mechanics did not help this situation. By the 1970 model year, most of the reliability issues had been resolved, but a necessarily generous warranty policy and damage to the car's reputation had undermined NSU's financial situation irreparably. NSU was acquired by Volkswagen in 1969 and merged with Auto Union to create the modern-day Audi company.

    Alternate power source
    In the UK, owners left with cars with seized engines were provided with a solution by the Hurley Engineering Company. They supplied a torque converter adapter plate and other fittings so that a Ford Essex V4 engine could be fitted in the space left by a removed rotary engine. It was the only engine short enough to fit in the vacated space without modification to the bodywork. Depending on which Ford model it came from, the engine was available with front or rear sump wells, crank pulley or timing case mounted cooling fan, two capacities, and a low compression version for using low-grade fuel. In terms of smoothness and refinement, the V4 was rough-running compared to the turbine quality of the rotary engine, but what the V4 did provide was dependability, an increase in torque, and an improvement in fuel consumption. Later, a Ford V6 was tried but needed body modifications, had poor fuel economy, and did not quite have the right handling balance.

    Production
    Series production began in October 1967 and the last examples came off the production line in April 1977.

    During 1968, the first full year of production, 5,986 cars were produced, increasing to 7,811 in 1969 and falling slightly to 7,200 in 1970. After this output declined, to about 3,000 - 4,000 per year for the next three years. The relatively high fuel consumption of the rotary engine worked against the car after the dramatic fuel price rises accompanying the oil crisis of 1973, and between 1974 and 1976 annual production came in well below 2,000 units. In total 37,398 Ro80s were produced during the ten-year production run. Ultimately, it was the contrasting success of the similarly-sized Audi 100 that sealed both the fate of the Ro 80, and the NSU brand as a whole within the Auto Union-NSU combine, as parent company Volkswagen began nurturing Audi as its performance-luxury brand in the late 1970s. After the discontinuation of the Ro 80 in 1977, the Neckarsulm plant was switched over entirely to producing Audi's C- and D- platform vehicles (the 100/200, and later the Audi A6 and A8), and the NSU brand disappeared from the public eye.

    Source: Wikipedia

    I only have one pic worth posting... anyone else?
    Attached Images Attached Images
    Last edited by Man of Steel; 03-01-2021 at 12:55 PM.

  2. #2
    Join Date
    Sep 2004
    Location
    California
    Posts
    3,552
    Did NSU make any non-Rotary engined cars?
    "Racing improves the breed" ~Sochiro Honda

  3. #3
    Join Date
    Oct 2004
    Location
    Germany -> West Germany -> NRW -> Düsseldorf
    Posts
    3,006
    Quote Originally Posted by PerfAdv
    Did NSU make any non-Rotary engined cars?

    Do you know the Prinz, TT, TTS?
    WRC - That's motorsport!

    "If you can see the tree you are about to hit, it is called 'understeering'. If you can only hear and feel it, it was 'oversteering'."
    Walter Röhrl

  4. #4
    Join Date
    Sep 2004
    Location
    California
    Posts
    3,552
    Quote Originally Posted by netburner
    Do you know the Prinz, TT, TTS?
    Not until I had posted then searched the forums for more NSUs. I only knew of the NSU from a magazine article I read a few years back. IIRC, the article spoke of the NSU salute. This occurred when two Ro80 drivers passed on the street they would hold up their fingers (1,2,3...) in a salute to show how many times they had the engine rebuilt or replaced. Wankel hadn't quite been made fully workable yet.
    "Racing improves the breed" ~Sochiro Honda

  5. #5
    Join Date
    Apr 2003
    Location
    Rozenburg, Holland
    Posts
    27,329
    Quote Originally Posted by smxi
    I only have one pic worth posting... anyone else?

    NSU RO80
    yes..
    "I find the whole business of religion profoundly interesting, but it does mystify me that otherwise intelligent people take it seriously." Douglas Adams

  6. #6
    Join Date
    Feb 2005
    Posts
    128
    here's another picture
    Attached Images Attached Images

  7. #7
    Join Date
    Feb 2005
    Posts
    128
    ......
    Attached Images Attached Images

  8. #8
    Join Date
    Feb 2005
    Posts
    128
    doesn't work...

  9. #9
    Join Date
    Dec 2003
    Location
    nr Edinburgh, Whisky-soaked Scotland
    Posts
    27,775
    Quote Originally Posted by valgabr
    doesn't work...
    Those files aren't jpegs
    How did you create them ??
    "A woman without curves is like a road without bends, you might get to your destination quicker but the ride is boring as hell'

  10. #10
    Join Date
    May 2005
    Posts
    2,948
    Quote Originally Posted by valgabr
    doesn't work...
    They have to be RGB not CMYK format.

  11. #11
    Join Date
    May 2003
    Posts
    125
    I've downloaded it and converted it to CMYK, but it's weighing in at 6 MB. What do I do?

  12. #12
    Join Date
    Dec 2003
    Location
    nr Edinburgh, Whisky-soaked Scotland
    Posts
    27,775
    aha, your second post of it was a valid jpeg. Not sure WHAT you posted first time Clinking on the image link in the secodn post works fine, just the thumbnail that's busted

    Anyway this is a funny I'd hoped would have been fixed with the recent update The thumbnail generator barfed again because the image is too large in pixel width.
    The attached is it converted to lower pixel count - still big enough.

    I'll followup on the error handling problem again !!!!

    PS: the other input was NOT to post in CMYK
    Attached Images Attached Images
    Last edited by Matra et Alpine; 11-11-2005 at 06:20 AM.
    "A woman without curves is like a road without bends, you might get to your destination quicker but the ride is boring as hell'

  13. #13
    Join Date
    May 2005
    Posts
    2,948
    Quote Originally Posted by valgabr
    here's another picture
    Thank you for an awesome pic and thanks to Matra et Alpine for posting it right.

  14. #14
    Join Date
    Aug 2004
    Posts
    8,068
    Did anyone else hear about the sign of the Ro80 owners???

    When passing a fellow Ro80 owner on the road, you were meant to hold up your hand and display the amount of fingers relating to how many engines you'd had put in the car, NSU kept them under warranty.

    Strange, but (apparently) true

  15. #15
    Join Date
    May 2005
    Posts
    2,948
    This is the pic that Valgabr posted but photoshoped to 1600x1200 for those like myself who prefers to have images that fit screen.
    Attached Images Attached Images

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Audi 80, The History of
    By Revo in forum Matt's Hi-Res Hide-Out
    Replies: 76
    Last Post: 06-28-2013, 02:34 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •