Page 1 of 3 123 LastLast
Results 1 to 15 of 35

Thread: Volvo S80 (2nd gen) 2006-2015

  1. #1
    Join Date
    Nov 2003
    Location
    Shanghai/China
    Posts
    620

    Volvo S80 (2nd gen) 2006-2015

    2006 Volvo S80#1
    Together with the all new Volvo S80, Volvo Cars is unveiling an entirely new high-efficiency six-cylinder in-line engine. It features an advanced induction system that contributes to both good performance and impressive fuel efficiency. Several innovative solutions also make it possible to create a remarkably compact engine. As a result, it can be installed transversely in the engine compartment, which contributes to impressive impact safety.

    “I think that this will be one of the most impressive six-cylinder engines on the market”, says Derek Crabb, Vice President Powertrain at Volvo Cars. The new six-cylinder engine has been designed by Volvo and is of an all-new, compact design. Its main structure is made entirely of aluminium and has a larger displacement than its predecessor, 3.2 litres as against the previous 2.9. Power is up too, to 175 kW (238 PS) as is torque, at 320 Nm. This corresponds to increases of 31 kW and 40 Nm respectively.

    The engine has been designed to be mated to Volvo’s new six-speed automatic transmission. And the entire driveline has been designed together with the rest of the car to create a harmonious, high-class driving experience in every respect.

    Two engines in one
    The engine features a range of very technically advanced solutions. An advanced valvetrain and a variable intake system mean that the engine can be exploited efficiently throughout the rev range, thus promoting alert response and excellent performance. At the same time, the engine is very fuel-efficient.

    The valvetrain features VCT (Variable Cam Timing) and CPS (Cam Profile Switching) on the inlet side – two key elements in providing the engine with excellent driveability and flexibility.

    CPS (Cam Profile Switching) means that the camshaft is designed such that the inlet valves are lifted to two different heights depending on engine speed and load. In normal driving, with normal throttle opening and low engine revs, fuel consumption is modest at the same time as torque is sufficient to provide good driveability.

    In more enthusiastic driving involving full throttle opening and high engine revs, the engine responds instantly to the accelerator and provides a massive thrust of power, both at low and at high speeds.

    “In principle, Cam Profile Switching creates two engines in one,” explains Derek Crabb. “We can unite widely differing demands on one and the same engine and easily meet the requirements of customers with entirely different wishes. For instance, we can equally easily satisfy customers who prioritise performance as well as those who are more interested in driving comfort and fuel economy.”

    VIS (Variable Intake System) has been equipped with two throttle flap valves which adjust the intake manifold volume to suit the current driving situation. This results in a uniformly high and broad torque curve.

    “Through precise interplay with the flap valves we actually get three different torque curves that are integrated with one another,” says Derek Crabb. “Consequently, we can exploit the engine’s capacity to the maximum and extract the highest possible power throughout the rev range. The result is alert response to the accelerator pedal at both low and high speeds, with both generous power and good driveability.”

    Compact format contributes to impressive collision safety
    Despite the engine’s 3.2 litre displacement, it has extremely compact exterior dimensions. The complete engine package is only 3 millimetres longer than Volvo’s five-cylinder engine. The total engine length is 625 millimetres.

    “A compact format is a matter of safety,” explains Derek Crabb. “It is particularly important that the engine takes up minimal space longitudinally in the vehicle. Volvo’s engines are fitted transversely and a compact engine thus has more space to move inside the engine compartment in the event of an impact that deforms the car’s front. This helps reduce the risk of engine penetration into the passenger compartment.” The engine itself cannot be made all that much smaller since the cylinder spacing and block structure are roughly the same as in the five-cylinder engine. Instead, the focus was on building the entire installation, encompassing the engine, automatic transmission and ancillaries, in as compact a package as possible. One additional condition that had to be taken into account was that the transmission would be a six-speed automatic.

    Integrated drive system with Shaft In Shaft design
    The compact dimensions of the transversely mounted, in-line six-cylinder engine are ensured by locating the ancillaries, such as the Power Assisted Steering Pump and Air Conditioning Compressor, behind the engine in the space above the gearbox. Consequently, there is no front-end drive of the ancillaries. Instead they are driven via gears by the rear end of the crankshaft. This engineering solution is known as READ – Rear End Ancillary Drive. The alternator is direct-driven and installed on the engine block. This solution means that the entire engine and transmission package takes up minimum space, particularly in the car’s longitudinal direction.

    By designing the drive system in the form of a small gearbox with an intermediate shaft inside the driveshaft – known as a Shaft In Shaft design – it was possible to ensure a very short package. The two shafts are driven by different gears that give them different speeds (one speed for camshaft drive and one for the ancillaries).

    “We are very proud of this compact solution,” relates Derek Crabb. “A lot of highly advanced development work was required in order to arrive at a design that ensures smooth and quiet operation.”

    The vibration damper too, which compensates for vibration in the six-cylinder engine’s relatively long crankshaft, has been moved inside the engine block. The IVD (Internal Viscous Damper) is of the fluid type and is an unusual solution in the context of passenger cars.

    “All told, the new six-cylinder engine offers a premium experience in every respect,” comments Derek Crabb. “This applies to its performance and fuel efficiency, and also to its driving comfort and the sound of the engine. The fact that the engine’s design also helps enhance safety isn’t something the customer usually thinks about, but it is naturally a central part of Volvo’s product concept,” he adds.

    Built in Wales
    Volvo’s new six-cylinder engine will be built in Ford’s modern engine factory in Bridgend, Wales. The factory was built in 1980 and had already manufactured ten million engines by 2001. In recent years, considerable investments have been made to meet the stringent quality requirements imposed by Ford’s Premium Automotive Group (PAG).

    “Bridgend is a dedicated engine production unit,” explains Derek Crabb. “The factory builds many of the six- and eight-cylinder engines for PAG’s various brands. Although the new Volvo engine is being built in Bridgend, it was specified, designed, engineered and developed entirely by Volvo. The engine will start series production in week 13, 2006.”

    Engine specifications
    Engine type: 6-cylinder in-line engine, petrol, normally aspirated
    Engine location, drive: Transverse, front-wheel drive
    Cylinder displacement: 3,192 cc
    Cylinder bore x stroke: 84 mm x 96 mm
    Engine block, material: Aluminium
    Cylinder head, material: Aluminium
    Number of valves per cylinder: 4
    Number of camshafts: 2
    Maximum power output: 175 kW (238 PS) at 6,300 rpm
    Maximum torque: 320 Nm at 3,500 rpm
    Fuel injection: Port Fuel Injection (PFI)
    Fuel consumption (preliminary): 9.9 litres/100 km (mixed driving cycle)
    Emissions levels: ULEV II, Euro 4
    Weight: 180 kg
    Attached Images Attached Images
    This guy is so lazy that only one eye was left...

  2. #2
    Join Date
    Nov 2003
    Location
    Shanghai/China
    Posts
    620
    2006 Volvo S80#2
    More information will come.
    Attached Images Attached Images
    This guy is so lazy that only one eye was left...

  3. #3
    Join Date
    Nov 2004
    Location
    Bay Area, California, U.S., North America, Earth, Solar System, Milky Way,
    Posts
    3,127
    Volvo is doing some amazing job......is there gonna be a new S60 too? Looking forward to any R version.
    The Ace of All Aces.

    Crysis. Maximum Game.

  4. #4
    Join Date
    Feb 2005
    Location
    Barcelona
    Posts
    33,331
    In the 1st pic on the boot it says V8 AWD, so I'm assuming that Volvo's 4.4-litre V8 first unveiled in the XC90 will also be available on the S80.
    Lack of charisma can be fatal.
    Visca Catalunya!

  5. #5
    Join Date
    Nov 2004
    Location
    UK
    Posts
    2,734
    initially i was unsure but after comapring to the old one i think its much better. the coupe style roofline a la s60 is great and the back looks much tighter.

  6. #6
    Join Date
    Apr 2003
    Location
    For Tax Purposes, Cayman Islands
    Posts
    14,581
    This is one fine looking automobile! Volvo have had a wonderful change of fortune recently, and this is a fitting flagship.

    Discreet, safe, but with enough welly to kick some ass. Lovely.
    <cough> www.charginmahlazer.tumblr.com </cough>

  7. #7
    Join Date
    Jan 2005
    Location
    Derby, England
    Posts
    2,192
    This looks great...but where have I seen that aerial before...?
    "This is hardcore." - Evo's John Barker on the TVR Tuscan S

  8. #8
    Join Date
    Jul 2003
    Location
    Belgium
    Posts
    1,991
    Don't really like the exterior. A bit bland like all the other Volvo's but I really love the center console like in the S40/V50.

  9. #9
    Join Date
    Sep 2004
    Location
    land of the Desert Extreme Challenge Rally
    Posts
    5,501
    Going back to Honda now are we ...

  10. #10
    Join Date
    May 2005
    Location
    123
    Posts
    5
    The front looks like an Audi

  11. #11
    Join Date
    Apr 2003
    Location
    Toronto
    Posts
    1,833
    I think it looks great, I really like it. Especially the back, it's a lot more aggressive and sporty looking than the outgoing model.
    i was waiting on a moment, but the moment never came. all the billion other moments, were just slipping all away. i must have been tripping, we're just slipping all away. just ego tripping.

  12. #12
    Join Date
    Feb 2005
    Location
    Panama Republic
    Posts
    308
    nice honda civic

  13. #13
    Join Date
    Nov 2004
    Location
    Toronto, Canada
    Posts
    2,699
    looks good, anyone think there's going to be a R version?
    2011 Honda Civic Si

    ATHEIST and damn proud of it.

  14. #14
    Join Date
    Apr 2004
    Location
    Delft
    Posts
    3,993
    Quote Originally Posted by Vindesh17
    looks good, anyone think there's going to be a R version?
    I doubt it, mainly because it’s marketed as a limousine and second because this one already has the suspension-setting-knobs that can be found in the R versions.

    Attached Images Attached Images

  15. #15
    Join Date
    Mar 2005
    Location
    Eindhoven
    Posts
    4,059
    I always like Volvo's. They have this classy look, really nice. All I can say to Volvo is: Keep up the good work! *thumbs up!*

    EDIT - 1800 posts!
    Last edited by jorismo; 01-30-2006 at 12:06 PM.
    "The best thing about this is that you know that it has to come from a country where drugs is legal"

    Top Gear on the Vandenbrink Carver One

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Volvo S60/V60 (2nd gen) 2010-2018
    By Ferrer in forum Matt's Hi-Res Hide-Out
    Replies: 60
    Last Post: 01-09-2015, 12:01 PM
  2. Gran Turismo 5
    By Sauc3 in forum Gaming
    Replies: 1020
    Last Post: 05-19-2014, 03:16 PM
  3. Volvo C70 (2nd gen) 2006-2013
    By McLareN in forum Matt's Hi-Res Hide-Out
    Replies: 43
    Last Post: 09-03-2009, 10:54 AM
  4. Hide-Out Index
    By Sauc3 in forum Matt's Hi-Res Hide-Out
    Replies: 59
    Last Post: 06-20-2008, 02:43 AM
  5. Volvo XC70 (2nd gen) 2000-2007
    By Duell in forum Matt's Hi-Res Hide-Out
    Replies: 2
    Last Post: 03-05-2007, 01:06 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •