The Plymouth Barracuda is a two-door pony car manufactured by Plymouth from 1964 to 1974.
The first-generation Barracuda, a hardtop fastback, was based on the A-body platform (shared with the Valiant). The first generation car featured distinctive wraparound back glass and was marketed from 1964 to 1966.
The second-generation Barracuda, built from 1967 to 1969, though still Valiant-based, was heavily redesigned. Body designs were now available in fastback, hardtop coupé, and convertible versions.
The third generation, offered from 1970 to 1974, was no longer based on the A-body, but on the Chrysler E-body. The completely new design was similar to the Dodge Challenger and available in hardtop and convertible body styles. The Barracuda was discontinued after the 1974 model year.
Third generation (1970-1974)
1970-1971
The redesign for the 1970 Barracuda removed all its previous commonality with the Valiant. The original fastback design was deleted from the line and the Barracuda now consisted of coupe and convertible models. The all-new model, styled by John E. Herlitz, was built on a shorter, wider version of Chrysler's existing B platform, called the E-body. Sharing this platform was the newly launched Dodge Challenger; however no exterior sheet metal interchanged between the two cars, and the Challenger, at 110 inches (2,794 mm), had a wheelbase that was 2 inches (51 mm) longer than the Barracuda.
The E-body Barracuda was now "able to shake the stigma of 'economy car'." Three versions were offered for 1970 and 1971: the base Barracuda (BH), the luxury oriented Gran Coupe (BP), and the sport model 'Cuda (BS). Beginning mid year 1970, and ending with the 1971 model, there also was the Barracuda Coupe (A93), a low-end model which included the 198ci Slant Six as a base engine, lower grade interior, and (like other Coupe series Chrysler Corp. offered that year) had fixed quarter glass instead of roll-down rear passenger windows. The high-performance models were marketed as 'Cuda deriving from the 1969 option. The E-body's engine bay was larger than that of the previous A-body, facilitating the release of Chrysler's 426 cu in (7.0 L) Hemi for the regular retail market.
For 1970 and 1971, the Barracuda and Barracuda Gran Coupe had two six-cylinder engines available — a new 198 cu in (3.2 L) version of the slant-6, and the 225 — as well as three different V8s: the 318ci, the 383ci with two-barrel carburetor and single exhaust, and the 383ci with four-barrel carburetor and dual exhaust 330 hp (246 kW) SAE gross. The Cuda had the 383ci 335 hp (250 kW) SAE gross (same as Dodge's 383 Magnum) as the standard engine. It also had the 440ci four-barrel Super Commando, the 440ci six-barrel Super Commando Six Pak, and the 426ci Hemi.[16] The 440- and Hemi-equipped cars received upgraded suspension components and structural reinforcements to help transfer the power to the road.
In 1970 the power plant options offered to the customer were:
1. 275 hp (200 kW) SAE gross in the 340-4V.
2. 335 hp (250 kW) SAE gross in the high performance 383-4V,
3. 375 hp (280 kW) SAE gross in the 440-4V,
4. 390 hp (290 kW) SAE gross in the 440-6V, and
5. 425 hp (317 kW) SAE gross in the 426-8V.
Other Barracuda options included decal sets, hood modifications, and some unusual "high impact" colors such as "Lime Light", "Bahama Yellow", "Tor Red", "Lemon Twist", "Curious Yellow", "Vitamin C", "In-Violet", "Sassy Grass" and "Moulin Rouge".
Swede Savage and Dan Gurney raced identical factory-sponsored AAR (All American Racers) 'Cudas in the 1970 Trans-Am Series. The cars qualified for three pole positions but did not win any Trans-Am races; the highest finish was second at Road America. A street version of the AAR 'Cuda was produced, powered by the 340 cu in (5.6 L) "Six Pack" (three two-barrel carburetors) engine. Four 1970 Hemi 'Cudas were also successfully raced by Chrysler France, from 1970 until 1973. The works team director Henrí Chemin piloted the first car, and then sold it on to friend and privateer J. F. Mas who went on to race it for another two years. This Hemi 'Cuda won four French Group 1 class championships, three on track and one in hill-climbing.
The Barracuda was changed slightly for 1971, with a new grille and taillights, seat, and trim differences. This would be the only year that the Barracuda would have four headlights (which the Challenger had for all five years of their concurrent run), and also the only year of the fender "gills" on the 'Cuda model.
The 1971 Barracuda engine options would remain the same as that of the 1970 model, except that the 340 6-Bbl was gone, and the four-barrel carbureted 440 V8 engine was no longer on the option list, but could be had via a special order and perhaps a dozen cars were built with it installed; otherwise the 440-powered Barracudas had a six-barrel carburetor setup instead.
In 1971 the big-block power options offered to the customer were:
1. 275 hp (205 kW) SAE Gross in the 383-2V
2. 300 hp (224 kW) SAE Gross in the 383-4V
3. 385 hp (287 kW) SAE Gross in the 440-6V
4. 425 hp (317 kW) SAE Gross in the 426-8V
In 1970 and 1971 only, the shaker hood (option code N96), elastomeric (rubber) colored bumpers, and the Spicer-built Dana 60 rear axle were available. The shaker hood was available with 340, 383, 440 four-barrel, 440 six-barrel, and 426 Hemi engines. The elastomeric (rubber) colored bumpers were available either as a front-only option, option code A21, or as a front and rear combination, option code A22. The heavy-duty (and heavy) Dana 60, with a 9.75 in (248 mm) ring gear, was standard equipment with manual transmissions and 440 six-barrel and 426 Hemi engines, and was optional on those with the automatic transmission.
Source: Wikipedia
1970 Barracuda 426 HEMI