Completed in August. I should've posted these a while ago, but before i knew it, school came along. Therefore, i lost the time to snap any pictures. When the chance was apparent, i took a few pictures. Through the build, there were little issues here and there. the first problem was the engine wouldn't stay at the correct angle. Second, upon completion of the interior, i lost the stick for the shifter. It was only when i was near completion that i found the shifter. That meant taking the body off just to glue the shifter on. However, my biggest issue was the seats. I especially despise the way they are to be assembled. I acidentally painted them first, and it turns out that the point of attachments were too thin, so i had to very careful. I'd recommend first gluing the seats together before painting. Apart from the above, this kit went together very well. I was especially delighted by the way that the wheels are attached. Since it works differently from the old revells, so the wheels can properly roll. From Esperante's build, he pointed out that the suspension was too high, so i decided to search for some wheels and install them. They're a bit too big, but i think that that really don't look too bad. Apart from the kit parts, all I added were the rims and a little bit of weathering. In comparison to Esperante's Mustang, though, I don't think mine is as good, since I kinda rushed a few parts. 1 step closer to making better models(helpful criticism is welcome)Anyway, enjoy the pics.