Results 1 to 15 of 15

Thread: BMW M3 CRT (Carbon Racing Technology)

  1. #1
    Join Date
    Feb 2004
    Location
    Southeast US
    Posts
    5,582

    BMW M3 CRT (Carbon Racing Technology)

    BMW M3 CRT #1

    Intelligent lightweight design paves the way for even higher performance: the BMW M3 CRT.

    Carbon Racing Technology: BMW M GmbH factory produces a limited-edition high-performance sports car based on the BMW M3 Saloon – Innovative use of carbon-fibre reinforced plastic minimises weight – Weight-to-power ratio: 3.5 kilograms per horsepower.

    Munich/Nürburg. BMW M GmbH will use the M Night event in the lead-up to the Nürburgring 24-hour race to unveil a spectacular new addition to its model range. The BMW M3 CRT (Carbon Racing Technology) embodies a concentrated blend of state-of-the-art development expertise – inspired directly by motor sport – in the areas of drive system and chassis technology and intelligent lightweight design. It also represents the worldwide debut of a new production process for carbon-fibre reinforced plastic (CFRP) components in the automotive industry. This process allows CFRP to be introduced widely in the construction of the high-performance BMW M3 Saloon-based sports car created by the BMW M GmbH factory. And that helps it achieve a weight-to-power ratio of 3.5 kilograms per horsepower. A V8 engine with customary M high-revving characteristics and maximum output of 331 kW/450 hp accelerates the BMW M3 CRT from 0 to 100 km/h in just 4.4 seconds. The BMW M3 CRT will be produced by the BMW M GmbH factory in a limited run of 67 units. Following in the tyre tracks of the BMW M3 GTS – of which 135 examples were produced – this is the second small-series, high-performance M3 off-shoot to be bred for the race track but registered for the road. The exclusive character of the Saloon is emphasized by bespoke lightweight design components manufactured as part of an innovative production process. The bonnet of the BMW M3 CRT and the bucket seats for the driver and front passenger are made from a cellular carbon honeycomb, which is produced in a globally unique process pioneered for the manufacture of body components for the BMW i3 and BMW i8 models.

    Innovative manufacturing process for lightweight CFRP components.

    These new models – due to enter volume production in 2013 and equipped with innovative electric and BMW ActiveHybrid drivesystem technology – will feature a body consisting entirely of CFRPin the passenger cell area. In a new development, the production process introduced for this purpose enables the cuttings left behind in the construction of the body to be reprocessed. The basic material (made up of carbon fibre thread) can now be woven into CFRP mats of any size before being impregnated with synthetic resin and hardened in a similar way to the material used in the body of the BMW i3 and BMW i8. For the BMW M3 CRT this allows the creation of a bonnet made from two CFRP mouldings encasing an aramid honeycomb structure. This construction imbues the bonnet with the
    strength of a conventional steel equivalent, but at roughly a quarter of its weight. The weight saving over the aluminium bonnet of the standard BMW M3 Saloon is around 50 per cent.

    The material produced through this innovative manufacturing technology is also used for the car’s bucket seats. Here, the CFRP layers are wrapped around a recycled-paper honeycomb, with a carbon layer made using conventional production technology added to visible areas. CFRP is also used to make both the rear spoiler of the BMW M3 CRT and an air-channelling element integrated into its front apron.

    This innovative manufacturing process opens up considerable potential for increased use of CFRP in series-produced cars as a means of lowering weight.

    The BMW Group is leading the way in this area of automotive construction, while BMW M GmbH can call on extensive racing expertise when it comes to intelligent lightweight design. The BMW M3 CRT is the latest in a fine tradition of highly exclusive high-performance sports cars optimised with the help of lightweight design. This lineage stretches back to the BMW 3.0 CSL of the 1970s and reached another high point in 2002 with the BMW M3 CSL. BMW M GmbH also broke new ground with the use of CFRP in series-produced vehicles; like the BMW M6 produced up to
    2010, the current BMW M3 Coupé comes as standard with a roof made from carbon-fibre reinforced plastic.

    Significant weight reduction despite generous standard equipment.

    The low-weight construction of the BMW M3 CRT is enhanced by sound-proofing configured specially for the new variant and a sports exhaust system with an extremely lightweight titanium muffler. Also unique to the CRT are the two individual rear seats, which take their cues from the lateral support-enhancing contours of the front seats.
    Included in the standard specification of the BMW M3 CRT are the M double-clutch transmission with Drivelogic, Navigation system Professional, BMW Individual High End audio system, a light, exterior mirror and luggage area package, an alarm system and Park Distance Control with sensors at the front and rear of the car. Despite this extremely generous selection of standard kit, its DIN unladen weight of 1,580 kg undercuts that of the standard BMW M3 Saloon by around 45 kg. When you take into account the equipment on board the weight saving is more like 70 kg. Added to which, cleverly reducing the load at the front of the car raises the proportion of the car’s weight over the rear axle to 48.4 per cent, which has an extremely positive effect on agility.
    Attached Images Attached Images

  2. #2
    Join Date
    Feb 2004
    Location
    Southeast US
    Posts
    5,582
    BMW M3 CRT #2

    High-revving V8 engine with extra power; M DCT Drivelogic.

    Under the CFRP bonnet of the BMW M3 CRT lies a variant of the V8 engine developed exclusively for the BMW M3 with further increased displacement, output and maximum torque. The high-revving unit provides the linear power delivery you expect from an M car and a highly responsive performance profile honed by the demands of the race track. Tuned for the BMW M3 GTS, the eight-cylinder engine develops 331 kW/450 hp from its 4,360 cc displacement. Maximum output is reached at 8,300 rpm, and the driver will find peak torque of 440 Newton metres on tap at 3,750 rpm. Helping to give the engine its intoxicating performance is wizardry derived directly from motor sport, including a bedplate crankcase construction in a special aluminium-silicon alloy, individual throttle butterflies, a knock control system with ion current technology and a dynamically-optimised wet sump oil supply.

    Transferring the engine’s power to the rear wheels is the M doubleclutch transmission with Drivelogic developed for the BMW M3. The seven-speed M DCT Drivelogic unit also works according to a principle developed in motor sport, allowing an uninterrupted flow of power through gear changes to deliver extremely dynamic acceleration. Its shift characteristics have been tuned specially for the engine powering the BMW M3 CRT. Shift paddles on the steering wheel allow the driver to change gear manually with optimum ergonomics. And a Launch Control function is on hand to generate maximum acceleration off the start line.

    Special chassis construction with race-bred technology.

    Expertise from race competition also makes its presence felt in the chassis technology of the BMW M3 CRT. The BMW M3 Saloon’s front and rear axle construction has been enhanced by a rigid rear axle subframe and coilover suspension whose dampers are individually adjustable in their compression and rebound. The sixpiston, fixed-calliper high-performance brakes of the BMW M3 CRT boast a low-weight compound construction. The vented brake discs measure 378 x 32 millimetres at the front axle and 380 x 28 millimetres at the rear. The new M3 variant also uses Stahlflex brake lines and model-specific comfort brake pads.

    The specially tuned DSC (Dynamic Stability Control) system – including ABS and M Dynamic Mode (MDM) – responds to both the greater dynamic potential of the BMW M3 CRT and its optimised axle load distribution. Meanwhile, the 245/35 R 19 front tyres and 265/35 R 19 rears (fitted on 19-inch M light-alloy wheels in Y-spoke design) ensure the engine’s acceleration and braking power is transferred to the road with maximum impact. The electronic engine management of the BMW M3 CRT caps its top speed at 290 km/h.

    The exclusive Frozen Polar Silver metallic exterior paint shade in combination with Melbourne Red metallic applications and special treatment for the BMW kidney grille also help to set the BMW M3 CRT apart from the standard M3. Inside, the Saloon comes with likewise exclusive door sill strips, door panels and trim strips in aluminium grain structure. Completing the distinctive ambience inside the high-performance Saloon are the Alcantara-covered M steering wheel, which has an M Drive button allowing the driver to call up his preferred set-up instantly, and special Sakhir Orange and Black bi-colour covers for the front and individual rear seats.

    Source [BMW]
    Attached Images Attached Images

  3. #3
    Join Date
    Feb 2004
    Location
    Southeast US
    Posts
    5,582
    BMW M3 CRT #3

    A lil vid.

    [ame="http://www.youtube.com/watch?v=Op96Pz4OrYw&feature=player_embedded"]http://www.youtube.com/watch?v=Op96Pz4OrYw&feature=player_embedded[/ame]

  4. #4
    Join Date
    Dec 2003
    Location
    nr Edinburgh, Whisky-soaked Scotland
    Posts
    27,775
    wtf weight-to-power ? Who has EVER used that. Give it in normal power/weight where I guess the number isn't that impressive
    "A woman without curves is like a road without bends, you might get to your destination quicker but the ride is boring as hell'

  5. #5
    Join Date
    Jul 2005
    Location
    N.Z.
    Posts
    436
    excellent power & torque from the V8 for its capacity tho

  6. #6
    Join Date
    Jul 2008
    Location
    Orange County, California
    Posts
    230
    The car as a whole seems like a culmination of parts from a BMW Performance catalog, much like the BMW Performance 335i (although I mean that in a good way). The color combination and new parts give the car a more aggressive look but maintain a distinct factory appearance at the same time. Those new lightweight seats do actually look comfortable to sit in, and they should have made them an option with the coupe's Competition Package IMO.

    Will this new M3 CRT be sold in the US by any chance?
    Last edited by LHamilton_w; 06-23-2011 at 08:00 PM.
    Buy a car for you, not for other people

  7. #7
    Join Date
    Oct 2006
    Posts
    10,227
    Quote Originally Posted by Matra et Alpine View Post
    wtf weight-to-power ? Who has EVER used that. Give it in normal power/weight where I guess the number isn't that impressive
    Some American publications mention weight to power - I dislike it.

  8. #8
    Join Date
    Dec 2003
    Location
    nr Edinburgh, Whisky-soaked Scotland
    Posts
    27,775
    ^^^ published by Murdoch group no doubt and not wanting to use any of that commy/pinko/chinese terms
    "A woman without curves is like a road without bends, you might get to your destination quicker but the ride is boring as hell'

  9. #9
    Join Date
    Aug 2010
    Location
    England, somerset
    Posts
    915
    Nice, i would rather have this over a M3 GTS, it's more practical and just as fast, well it may be a bit slower but who cares. I really like this car; I’m a big fan of the M3 anyway.
    Speed has never killed anyone. Suddenly becoming stationary, that's what gets you."
    — Jeremy Clarkson

  10. #10
    Join Date
    Aug 2010
    Location
    England, somerset
    Posts
    915
    One more thing to add. Those brakes, you finally get some decent brakes on an M car.
    Speed has never killed anyone. Suddenly becoming stationary, that's what gets you."
    — Jeremy Clarkson

  11. #11
    Join Date
    Feb 2005
    Location
    Barcelona
    Posts
    33,489
    70kg doesn't sound like much for all the fuss...
    Quote Originally Posted by Dino Scuderia View Post
    undercuts that of the standard BMW M3 Saloon by around 45 kg. When you take into account the equipment on board the weight saving is more like 70 kg.
    So basically, what they have done is lighten the car, then fill it up with equipment?

    Sense?
    Lack of charisma can be fatal.
    Visca Catalunya!

  12. #12
    Join Date
    Jun 2005
    Location
    East Coast of the United States
    Posts
    11,994
    CRT sounds more like a television than a car.

    Cool concept, I'm curious as to why carbon fiber still isn't mass produced- we've had it in cars for almost 20 years now- why is it still expensive?

    As fuel economy needs to rise, weight is one place where they can work at.

    Besides, what ever happened to Gordon Murray's City Car?

  13. #13
    Join Date
    Jan 2007
    Location
    Poland
    Posts
    2,044
    Why 67? Is there something special in this numer?

  14. #14
    Join Date
    Oct 2006
    Posts
    10,227
    Canada became independent in 1867 and the last time the Leafs won the cup is 1967 - I guess this is a throw out to Canada/Toronto...

    Not really.

  15. #15
    Join Date
    Apr 2003
    Posts
    5,456
    Quote Originally Posted by thebrochureman View Post
    One more thing to add. Those brakes, you finally get some decent brakes on an M car.

    QFT.....Looks like the new M5 will get some decent brake hardware also...

    Never understood why BMW stuck with the floating calipers for so long...for a group of cars(M cars) that touts their relation to motorsport, they'll be struggling to find a race car that uses that setup by choice....
    University of Toronto Formula SAE Alumni 2003-2007
    Formula Student Championship 2003, 2005, 2006
    www.fsae.utoronto.ca

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Really useful performance listings...
    By Egg Nog in forum Technical forums
    Replies: 59
    Last Post: 04-18-2021, 05:13 PM
  2. BMW 7-Series (F01) 2008-2015
    By Duell in forum Matt's Hi-Res Hide-Out
    Replies: 44
    Last Post: 05-28-2012, 10:16 AM
  3. BMW X1 (E84) 2009-2015
    By Ferrer in forum Matt's Hi-Res Hide-Out
    Replies: 86
    Last Post: 02-11-2010, 01:32 PM
  4. BMW M3 (E92) GTS 2010
    By Ecnelis in forum Matt's Hi-Res Hide-Out
    Replies: 5
    Last Post: 11-11-2009, 08:52 PM
  5. What BMW means??
    By Swissbeatz in forum Miscellaneous
    Replies: 59
    Last Post: 09-24-2007, 03:58 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •