Performance of your car

[Kozy]

Honda Civic EK4

~165bhp @ 7600
~115lbft @ 6000

0-60 - Stock is 7.6, with the quaiffe diff, lightened flywheel, lightweight wheels and slightly more power than stock I reckon it could manage a sub 7. Never bothered to actually time it though.

Top speed, no idea, tracking is out so it wanders too much at high speed. Had 120mph with a little more to go.

[Waugh-terfall]

BG Mazda 323 1.3i 16v
Power: 75bhp/55kw
Torque: 103NM/76lb-ft
0-62: 12secs
Top Speed: 103mph/166kmh

Fastest I've had it is 75mph so far, but I've had it to 6,000rpm whilst overtaking, it redlines at 6,250rpm.
Now, if only the name incorporated the letters 'G', 'T' & 'R'

C6 Audi A6 2.4v6 24v
Power: 177bhp/130kw
Torque: 230NM
0-62: 9secs
Top Speed: 143mph/230kmh

Now, if only the 'A' was scrapped for 'RS'...

[cmcpokey]

Infinity G35/Nissan Skyline GT350 6MT
297 HP
258 lb. ft.
0-60: supposedly 5.8. but i cant keep traction well enough. need new tires
topspeed limited to 155. i expect it could touch 170 de-limited.
I have had it up to 141
redlines at 7000, limiter at 8000. i have the shift light set at 7000, and its easy to omiss.

[Rasmus]

S197 Mustang GT vert 5MT
300bhp, 285'ish rwhp I guess
320 lb.ft.
0-60 in 6.1 and a 145mph top.

Haven't really had the need to test the top speed claim yet. I do want to plonk in a 4.10 rear and do the ubiquitous CAI and tune just for the hell of it though.

[P4g4nite]

E28 535i

3.4L I6 SOHC 4spd slusherbox

About 200bhp when Reagan ran things and maybe 300nm. Weighs under 1400kg tho..

Has an M5 lsd, which makes highway cruising a slightly uncomfortably high rpm affair. And later model BMW alloys with uncomfortably expensive rubber.

[scottie300z]

2004 Chevrolet Cavalier
Horsepower : 140 hp @ 5600 rpm
Torque : 150 lb-ft @ 4000 rpm

Top speed : 112 mph(electronically limited)
0-60 mph : 8.0 sec.
0-¼ mile : 16.2 sec @ 85.0 mph
60-0 braking distance : 130 ft
200 ft skidpad : 0.80 g

Curb Weight : 2749 lbs

Done the top speed, but that's nothing special. Added an intake filter with my fancy custom tubing so the 0-60 is most likely 7.999999 sec now.

Suspension isn't good and the transmission is worse, but having slightly worn rear tires helps it's fwdness, and I bet crashing it into a brick wall is the only way to improve the transmission. I'm going to have it as long as I can though, make my dollars stretch.

[ripper46]

94' mk3 golf gti 16v

150 hp at 6500 rpm and 185 NM at 4000 ish-rpm
weigs about 1100 kg
0-100 kph claim manufacturer 8.6
My own findings: 7.9something
Topspeed according to VW 210 KPh, I hit 230 on the tacho once , easyly.

99' bmw 320ci

150 hp and 195 Nm of torque IF the vanos would work, but according to "experts" every vanos on m52TU engines will allready have failed
weighs about 1.5 tonnes
0-100 kph is 9 and a bit seconds says bmw and the top is 221,also according to bmw

[SlickHolden]

2000 Holden Berlina 3.8lt V6.

Power 147kw 304Nm.

Max speed NFI.

0-100 8.8 seconds, Factory 8.9 seconds.. Got a fast one here.

[MRR]

S197 Mustang GT vert 5MT
300bhp, 285'ish rwhp I guess
320 lb.ft.
0-60 in 6.1 and a 145mph top.

Haven't really had the need to test the top speed claim yet. I do want to plonk in a 4.10 rear and do the ubiquitous CAI and tune just for the hell of it though.

I thought it was a lot faster to 60 mph than 6.1. Motor Trend and a bunch of others got 5.2 but they probably dropped the clutch with the motor already spinning. With a 4.10 rear and other mods who knows

[ripper46]

221 kmh for a bmw 320ci is correct, after that it hits the limiter.

[coolieman1220]

2001 Toyota Highlander V6 AWD
210 Horsepower
Prolly same torque
3.0 V6 VVT-I
0-60 8 second range?
Top speed, i don't think it's ever seen 100.

2007 Honda Civic Coupe LX
140 Horsepower
About same on Torque from the R18
1.8L V-TEC 4 banger
0-60 bout same as highlander i think (i wanna race the two)
Top speed - 125 MPH, i've seen 113 MPH

2003 Infiniti G35 Sedan
260 Horsepower
260 ft/lbs of torque
3.5L V6 VQ35DE
0-60 - 6 second flat
Top speed - 150 MPH, i've pushed it to 120 MPH

[roosterjuicer]

2002 camaro z28. 320 horsepower 340 ft/lbs of torque. 0-60 low 5's. 1/4 mile=high 13's.

1999 chevy suburban. 255 horsepower. 330 ft/lbs. 0-60 in the 9's. 1/4 mile-probably in the high 17's. seating=9+a few dogs and the sucker can tow like you wouldn't believe

[jcp123]

'67 Mustang

Original 289 block, bored .030" over
302 crank
306ci (5,0l) total
Edelbrock Performer 289 intake
Carter AFB 540cfm carb
stock heads
stock cam
Hedman Headers
Electronic Ignition
9,2:1 compression

Dynoed last December for 160,3hp @ 4100 and 229,5tq @ 3100 @ rear wheels.

Since then it has broken in fully (only had about 1500 miles on the car when it was dynoed), I have installed a fan clutch to replace the solid-mount steel fan, and put on a bigger air filter. I expect another 15+ hp from these.

0-60 = ??
1/4 mile guesstimate in the 15's.

[henk4]

Dynoed last December for 160,3hp @ 4100 and 229,5tq @ 3100 @ rear wheels.

only 160?

[f6fhellcat13]

The 289 (4.7L) only made 200-250hp when new. (EDIT: IIRC)
Definately not at the wheels, and I don't know if that figure is gross or net etc...