Results 1 to 7 of 7

Thread: Plymouth Road Runner (1st gen) 1968-1970

  1. #1
    Join Date
    Jan 2004
    Location
    Astoria, New York
    Posts
    1,131

    Plymouth Road Runner (1st gen) 1968-1970

    The Plymouth Road Runner is a mid-size car with a focus on performance built by Plymouth in the United States between 1968 and 1980. By 1968, some of the original muscle cars were moving away from their roots as relatively cheap, fast cars as they gained features and increased in price. Plymouth developed the Road Runner to market a lower priced, basic trim model to its upscale GTX.

    First generation (1968-1970)
    1968
    The earliest of the 1968 models were available only as 2-door pillared coupes (with a B-pillar between the front and rear windows), but later in the model year a 2-door "hardtop" model (sans pillar) was offered. The Road Runner of 1968-1970 was based on the Belvedere, while the GTX was based on the Sport Satellite, a car with higher level trim and slight differences in the grilles and taillights.

    The interior was spartan with a basic vinyl bench seat, lacking even carpets in early models, and few options were available — such as power steering and front disc brakes, AM radio, air conditioning (except with the 426 Hemi) and automatic transmission. A floor-mounted shifter (for the four-speed) featured only a rubber boot and no console so that a bench seat could be used.

    The standard engine was an exclusive "Roadrunner" 383 cu in (6.3 L) B-series V8 engine with a 4-barrel Carter Carburetor rated at 335 bhp (340 PS; 250 kW) at 5200 rpm and 425 lb⋅ft (576 N⋅m) at 3400 rpm of torque. Its extra 5 hp (4 kW) rating was the result of using the radical cam from the 440 Super Commando and a .25 raise in compression to 10.5:1 (vs. 10.25:1 with the 330 hp (246 kW) 383). When air conditioning was ordered, the cars received the 330 hp (246 kW) version, as the radical cam specs of the 335 bhp (250 kW) version did not create enough vacuum to accommodate air conditioning. A $714 option was the 426 cu in (7.0 L) Hemi with 2X4 Carter AFB carburetors rated at 425 bhp (431 PS; 317 kW) at 5000 rpm and 490 lb⋅ft (664 N⋅m) at 4000 rpm of torque.

    The standard equipment transmission was a 4-speed manual transmission with floor shifter and the three-speed TorqueFlite automatic transmission was optional. Early four-speed 1968 Road Runners featured Inland shifters, which were replaced by Hurst shifters during the course of the model year.

    Plymouth expected to sell about 20,000 units in 1968; actual sales numbered around 45,000. This placed the Road Runner third in sales among muscle cars with only the Pontiac GTO and Chevy's SS-396 Chevelle outselling it. Dodge debuted the Road Runner's cousin, the Super Bee, as a mid-1968 offering after seeing Plymouth's success with the Road Runner.

    1969
    The 1969 model kept the same basic look, but with slight changes to the taillights and grille, side marker lights, optional bucket seats, and new Road Runner decals. The Road Runner added a convertible option for 1969 with 2,128 such models produced that year. All were 383 cu in (6.3 L) engine cars, except for ten which were equipped with a 426 cu in (7.0 L) Hemi.

    An Air Grabber option (N96 code) was introduced this year; it consisted of a fiberglass air duct assembly bolted to the underside of the hood that connected to twin rectangular upward-facing vents in the hood with rallye red vent screens. The fiberglass hood box had an "Air Grabber" sticker on the front. When the hood was closed, a rubber seal fitted over the large-oval unsilenced air cleaner. A decal with Wile E. Coyote saying "Coyote Duster" was on the air cleaner lid. The assembly ducted air directly into the engine. The vents in the hood could be opened and closed via a lever under the dashboard labeled "Carb Air."

    The 383 engine was standard with the 426 Hemi the only option available for the Road Runner until mid-year production. The 383 was marketed as the "383 Road Runner" engine.

    The (A12) 440 engine option with 3X2 barrel Holley carburetors was added to the lineup at mid-year. The "440 Six Pack" had no wheel covers or hubcaps, only the 15x6" "H" stamped steel black wheels with chrome lug nuts. It featured a black fiberglass lift-off hood with 4 hood pins and a large functional hood scoop with a red sticker on each side saying "440 6BBL". The scoop sealed to the large air breather. All cars had a Dana 60 rear axle with a 4.10 gear ratio. Production of the 440 6-BBL A12 option Road Runner was approximately 1,432. The A12 option had an "M" as the fifth character in the VIN, rated at 390 hp (395 PS; 291 kW) at 4,700 rpm and 490 lb⋅ft (664 N⋅m) of torque at 3200 rpm,[6] the same torque as the Hemi but at a lower engine speed. The Plymouth Road Runner was named Motor Trend Car of the Year for 1969. Domestic production for the three body styles was 81,125 with an additional 3,295 deliveries in Canada and other countries.

    1970
    The 1970 model year brought new front and rear end looks to the basic 1968 body, and it would prove to be another success. Updates included a new grille, a cloth & vinyl bench seat, hood, front fenders, quarter panels, single-piston Kelsey-Hayes disc brakes (improved from the rather small-rotor Bendix 4 piston calipers of '68 - '69 ), and even non-functional scoops in the rear quarters. The design and functionality of the Air Grabber option was changed. A switch below the dash actuated a vacuum servo to slowly raise the forward-facing scoop, exposing shark-like teeth on either side. "High Impact" colors, with names like In-Violet, Moulin Rouge, and Vitamin C, were options available for that year. The engine lineup was left unchanged although a heavy-duty three-speed manual became the standard transmission, relegating the four-speed to the option list along with the TorqueFlite automatic. This was to be the second and last year of the Road Runner convertible, with only 834 made. The new high-back bucket seats shared with other Chrysler products which featured built-in headrests.

    The 440 Six Barrel remained an option for 1970. The 1969 "M" Code Edelbrock aluminum intake was replaced by a factory-produced cast iron piece; however there were some early cars built prior to January 1, 1970 that were equipped with the left over aluminum Edelbrock intake from the year prior.

    Sales of the 1970 Road Runner dropped by more than 50 percent over the previous year to around 41,000 units (about 1,000 ahead of Pontiac's GTO but still about 13,000 units behind Chevy's Chevelle SS-396/454). This would also be the last year of the Road Runner convertible with 834 total production. Only 3 Hemi (R) code Road Runner convertibles were built (plus 1 to Canada). The declining sales of Road Runner and other muscle cars were the result of a move by insurance companies to add surcharges for muscle car policies - making insurance premiums for high-performance vehicles a very expensive proposition. Also, Plymouth introduced another bargain-basement muscle car for 1970, the compact Duster 340 which was powered by a 275 hp (205 kW) 340 4-BBL V8 which in the lighter-weight compact A-body could perform as well if not better than a 383 Road Runner. Furthermore, the Duster 340 was priced even lower than the Road Runner and its smaller engine qualified it for much lower insurance rates.

    Source: Wikipedia

    1968 Road Runner 426 HEMI
    1970 Road Runner 440-6
    Attached Images Attached Images
    Last edited by Man of Steel; 01-16-2020 at 12:01 AM.

  2. #2
    Join Date
    Sep 2006
    Location
    The Netherlands
    Posts
    4,218
    Plymouth Road Runner (1st gen) #2
    Last edited by Man of Steel; 01-15-2020 at 11:38 PM.

  3. #3
    Join Date
    Sep 2006
    Location
    The Netherlands
    Posts
    4,218
    Plymouth Road Runner (1st gen) #3
    Last edited by Man of Steel; 01-15-2020 at 11:41 PM.

  4. #4
    Join Date
    Feb 2004
    Location
    Tallinn, Estonia
    Posts
    2,861
    Plymouth Road Runner (1st gen) #4
    Last edited by Man of Steel; 01-15-2020 at 11:39 PM.

  5. #5
    Join Date
    Feb 2004
    Location
    Tallinn, Estonia
    Posts
    2,861
    Plymouth Road Runner (1st gen) #5
    Attached Images Attached Images
    Last edited by Man of Steel; 01-15-2020 at 11:40 PM.

  6. #6
    Join Date
    Sep 2006
    Location
    The Netherlands
    Posts
    4,218
    Last edited by Man of Steel; 01-15-2020 at 11:44 PM.

  7. #7
    Join Date
    Sep 2006
    Location
    The Netherlands
    Posts
    4,218

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Plymouth GTX (2nd gen) 1968-1970
    By dracu777 in forum Matt's Hi-Res Hide-Out
    Replies: 2
    Last Post: 01-15-2020, 12:01 AM
  2. Plymouth Belvedere (7th gen) 1968-1970
    By Man of Steel in forum Matt's Hi-Res Hide-Out
    Replies: 0
    Last Post: 11-27-2019, 11:06 PM
  3. Satellite vs. Road Runner
    By Reaper in forum Classic cars
    Replies: 16
    Last Post: 07-25-2006, 08:57 PM
  4. Road Runner
    By Prius in forum Chop forums
    Replies: 7
    Last Post: 09-04-2005, 06:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •