Results 1 to 4 of 4

Thread: AMC Ambassador (6th gen) 1967-1968

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Mar 2004
    Victoria, Australia
    The Ambassador was the top-of-the-line automobile produced by the American Motors Corporation (AMC) from 1958 until 1974. The vehicle was known as the Ambassador V-8 by Rambler, Rambler Ambassador, and finally AMC Ambassador during its tenure in production. Previously, the name Ambassador had applied to Nash's "senior" full-size cars.

    The Ambassador nameplate was used continuously from 1927 until 1974 (the name being a top-level trim line between 1927 and 1931); at the time it was discontinued, Ambassador was the longest continuously used car nameplate in automotive history.

    Most Ambassador models were built in Kenosha, Wisconsin. They were also built at AMC's Brampton Assembly in Brampton, Ontario from 1963 to 1966. Australian Motor Industries (AMI) assembled Ambassadors from knock-down kits with right-hand drive from 1961 to 1963. The U.S. fifth generation Ambassadors were produced by Industrias Kaiser Argentina (IKA) in Córdoba, Argentina from 1965 to 1972, as well as assembled by ECASA in Costa Rica from 1965 to 1970. Planta REO assembled first-generation Ambassadors in Mexico at its Monterrey, Nuevo León plant. Fifth and seventh generation Ambassadors were modified into custom stretch limousines in Argentina and the U.S.

    Sixth generation
    American Motors introduced a completely restyled longer, lower, and wider Ambassador for the 1967 model year, now riding on a 118-inch (2,997 mm) wheelbase, or two inches (51 mm) longer than before. The Ambassador's platform was four inches (100 mm) longer than the new Rambler Rebel's 114-inch (2,896 mm) wheelbase. The Ambassador was positioned in the standard-size category, against traditional big cars such as Ford Galaxie, Chevrolet Impala, and Plymouth Fury. The convertible was offered again—this time in DPL trim—for 1967; but it would be the final year with only 1,260 built. It featured an all new "split stack" folding mechanism with concealed side rails that did not intrude into the backseat area, thus offering room for three adult passengers in the rear.

    The car once again looked completely new, with a more rounded appearance that sported sweeping rooflines, "coke-bottle" fenders, greater glass area, and a recessed grille that bowed forward less than that of the 1965–66 models. Taillights were wider, rectangular, and divided by one central vertical bar. Motor Trend magazine described the all-new styling of the new Ambassador as “attractive” and “more graceful and easier on the eye in ’67.

    The 880 two-door sedans featured the identical roofline as the hardtops, but had slim B-pillars that gave them a more open-air coupe appearance and were marketed as "Sports Sedans." The 880 was also available in 4-door sedan and station wagon version, but more popular were the better equipped and more upscale 990 models in 4-door sedan, station wagon, and 2-door hardtop body styles.

    Adding more elegance to DPL two-door hardtops and convertibles was an optional was a "Satin-Chrome" finish (paint code P-42) for the lower body side replacing the standard full-length stainless steel rocker moldings. A black or white vinyl cover was optional on 990 and DPL sedans and hardtops. The 990 Cross Country station wagons were available with 3M's "dinoc" simulated wood-grain body side panels trimmed in a slim stainless steel frame.

    The fastback Marlin two-door hardtop that was previously built on the Rambler Classic platform in 1965 and 1966, was continued for 1967, but was now based on the larger Ambassador platform. It featured the Ambassador's front end, longer hood, and luxury appointments with an even longer fastback roofline than the previous version.

    The full-sized Ambassador featured a lengthy list of standard features and options. The interiors "rival more expensive cars for luxury and quality, yet are durable enough to take years of normal wear." The premium materials and fittings included wood-grain trim, and even an optional "Custom" package with special upholstery and two matching pillows. Ambassador DPL hardtops included reclining bucket seats with a center armrest between them (with a center cushion for a third occupant or a floor console with gear selector), as well as a foldaway center armrest for the rear seat. The new safety-oriented instrument panel grouped all gauges and controls in front of the driver, with the rest of the dashboard pushed forward and away from the passengers. Focusing on safety, there were now no protruding knobs, the steering column was designed to collapse under impact, and the steering wheel was smaller than previous Ambassadors.

    The long-lived "GEN-1" family of AMC V8 engines was replaced by an all-new line of 290 and 343 cu in (4.8 and 5.6 L) engines that debuted for 1966 in the Rambler American. These V8s were an all-new design featuring thin-wall-casting block, heads, and manifold.[38] With a 4-barrel carburetor and dual exhaust, the 343 V8 produced 280 bhp (210 kW) at 4800 rpm and 365 pound force-feet (495 N⋅m) of torque at 3000 rpm. The old torque tube design was eliminated by a new four-link, trailing-arm rear suspension system providing a more comfortable coil spring ride.

    American Motors promoted the new 1967 Ambassador as an "uncompromising automobile with the red carpet ride" in print advertisements, as well as in an innovative TV commercial.

    Unfortunately, sales of the redesigned models were disappointing, due to customer confusion caused by the entire company's abrupt upmarket push, which seemed uncomfortably "me too" to the traditional domestic Big Three's customers, and they also alienated American Motors' loyal buyer base. Abernethy's ideas of entering new markets were not working. These strategy changes resulted in a new round of financial problems for American Motors. Because of this, Abernathy was released from AMC by its board of directors later that year, and was replaced by William V. Luneberg and Roy D. Chapin, Jr.

    Source: Wikipedia
    Attached Images Attached Images
    Last edited by Man of Steel; 04-05-2020 at 01:50 AM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Imperial (3rd gen) 1967-1968
    By Ferrer in forum Matt's Hi-Res Hide-Out
    Replies: 1
    Last Post: 11-09-2014, 03:56 PM
  2. Chaparral 2G 1967-1968
    By Ferrer in forum Matt's Hi-Res Hide-Out
    Replies: 0
    Last Post: 01-19-2014, 04:42 AM
  3. Alfa Romeo Scarabeo by OSI 1967-1968
    By Ferrer in forum Matt's Hi-Res Hide-Out
    Replies: 2
    Last Post: 08-22-2013, 11:53 PM
  4. Renault Alpine A211 1967-1968
    By Ferrer in forum Matt's Hi-Res Hide-Out
    Replies: 0
    Last Post: 06-16-2013, 02:42 PM
  5. Abarth 2000 OT Coupé (Tipo 139) 1967-1968
    By Ferrer in forum Matt's Hi-Res Hide-Out
    Replies: 0
    Last Post: 08-15-2012, 04:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts