Results 1 to 4 of 4

Thread: Ford Crown Victoria (1st gen - EN53) 1991-1997

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    May 2005
    Posts
    2,948

    Ford Crown Victoria (1st gen - EN53) 1991-1997

    The Ford Crown Victoria ("Crown Vic") is a full-size sedan that was marketed and manufactured by Ford. The successor to the Ford LTD Crown Victoria, two generations of the model line were produced from the 1992 to 2012 model years. The Ford counterpart of the Mercury Grand Marquis, the Crown Victoria was the largest sedan marketed by Ford in North America, slotted above the Ford Taurus. The Crown Victoria Police Interceptor (1992–2011) was marketed specifically for law-enforcement use; a long-wheelbase Crown Victoria sedan (2002–2011) was marketed primarily for taxi cab fleets.

    The Crown Victoria was produced on the rear-wheel-drive Ford Panther platform, sharing its chassis with the Grand Marquis and Lincoln Town Car. From 1997 until their 2011 discontinuation, the three model lines were the sole four-door sedans produced in North America with a full-length frame, rear-wheel drive, and a standard V8 engine.

    For its entire production, the Crown Victoria was produced by Ford Canada alongside the Grand Marquis at St. Thomas Assembly in Southwold, Ontario, Canada. From 1991 to 2011, over 1.5 million examples (including Police Interceptors) were produced by St. Thomas Assembly prior to its closure. A 2012 Crown Victoria (intended for Middle East export) was the final vehicle produced by the facility. Following the discontinuation of the model line, the Crown Victoria was not directly replaced, with the full-size Ford Taurus serving as the next basis for Ford police cars.

    Origin of name
    Prior to the 1992 model year, Ford used the Crown Victoria nameplate on two vehicles; both were flagship models of their full-size model range. From 1955 to 1956, the nameplate was used for premium two-door Ford Fairlanes. For 1980, the nameplate returned as the top trim of Ford LTD sedans, denoting all Ford full-size sedans in North America from 1983 to 1991.

    A styling feature used for both versions is a stainless-steel band trimming the B-pillars ("crowning" the roof).

    First generation (EN53) 1991-1997
    In the first quarter of 1987, development began on a redesign codenamed "EN53". The Ford Crown Victoria was unveiled on November 28, 1990 and began production in January 1991 as a 1992 model, launching on March 21, 1991. Fleet sales of the vehicle were postponed for 14 months to maximize availability for buyers at launch. In line with the redesign of the 1991 Chevrolet Caprice (its chief competitor), the 1992 Crown Victoria featured a major exterior redesign while retaining the previous-generation chassis. Ford reduced the coefficient of drag of the exterior from 0.42 to 0.34[7] (nearly matching the 0.32 of the Ford Taurus) to enhance aerodynamics and fuel efficiency, giving the first generation Crown Victoria its sleek, wedge-shaped design that would come to be known as the "Aero" look.

    Due to a market shift in family-oriented vehicles, the Crown Victoria was offered exclusively as a four-door sedan, with the wood-trimmed LTD Country Squire station wagon discontinued. While the Ford Taurus and Mercury Sable continued in production with optional three-row seating, the Country Squire was essentially replaced by the Ford Aerostar, Ford Econoline/Club Wagon, and Ford Explorer.

    Ford benefitted from a unique loophole in CAFE standards when the 1992 Crown Victoria and its Grand Marquis twin were launched. To avoid paying gas guzzler taxes, Ford modified its supplier network so that the two vehicles could be classified as imports from Canada, effectively removing the full-size sedans from the Ford domestic CAFE fleet (alongside the Ford Mustang V8) and placing them in its imported fleet (alongside the Ford Festiva).

    Chassis
    In lieu of developing an all-new platform architecture from the ground up, the Crown Victoria retained the Panther platform of its LTD Crown Victoria predecessor. Although launched in 1978, the Panther chassis underwent extensive upgrades to improve its road manners and handling; major updates were made to the steering and suspension tuning. To improve braking performance, the Crown Victoria gained four-wheel disc brakes, which were only seen on the Lincoln Mark VII, Ford Taurus SHO and Ford Escort GT (1991-1996). Available as options, anti-lock brakes and low-speed traction control became popular features. For 1997, several updates were made to improve handling response and steering control.

    Showcased in the redesign was the new Modular V8 engine. First introduced in the 1991 Lincoln Town Car, the 4.6 L SOHC V8 replaced the overhead-valve 5.0 L (302 CID) small block V8 and was the first of a family of overhead-cam engines that would eventually appear in several Ford and Lincoln-Mercury cars and trucks. Lighter than its predecessor, the 4.6 produced nearly identical torque output while producing 40 additional horsepower in its standard single-exhaust configuration. As with its predecessor and the Lincoln Town Car, the 4.6 was paired with a 4-speed overdrive automatic transmission. In 1993, the Ford AOD transmission was replaced by the electronically-controlled AOD-E version. For 1995, the AOD-E was replaced by the 4R70W, a heavier-duty version introduced in the Lincoln Mark VIII.

    Body
    Ford based much of the Crown Victoria's appearance on the first-generation Ford Taurus, a look pioneered by Ford VP of Design Jack Telnack. Though the Taurus became wildly popular in its market segment, Telnack's "Aero" look proved to be either a love or hate proposition with potential buyers of the Crown Victoria. Along with its distinctive no-grille front fascia, the Crown Victoria would share a similar roofline with the Taurus, similar body and bumper moldings, similar door handles, aircraft-style doors, and similarly shaped headlamp and taillamp clusters. To reduce aesthetic commonality with the Mercury Grand Marquis, only the front doors, windshield, and alloy wheels were shared between them.

    For the interior, the two vehicles also were given different seats, door trim, and dashboards; the Crown Victoria featured an instrument panel with round dials that included voltage and oil pressure gauges, while the Grand Marquis featured a horizontal speedometer without the full instrumentation. An electronic instrument panel was introduced as an option. Though better received than the 1990 redesign of the Chevrolet Caprice, the 1992 Crown Victoria was met with disapproval from some critics and buyers, leading Ford to revise the exterior. For the model year 1993, a grille was added to the front fascia (though it retained its "bottom-breather" cooling system configuration) and a red reflector strip was added to the trunk lid to visually connect the taillamps. For the 1995 model year, a mid-cycle redesign saw more extensive changes to the Crown Victoria; a 6-slot grille replaced the egg-crate design, and wider taillamps were added to the rear with the license plate positioned between them on the trunk lid. Inside, the 1995 Crown Victoria had redesigned seats and a new dashboard which was now shared with the Grand Marquis. The new design featured larger controls and switches, with the radio enlarged and positioned higher. The gauge cluster retained its previous layout. In late 1995, the first-generation "brick" airbag steering wheel was replaced by one with a smaller hub that returned the horn button to the center of the wheel.

    Features
    As with its LTD Crown Victoria predecessor, the Crown Victoria was a six-passenger automobile; the front seat was a 50/50 split bench seat. The Crown Victoria was sold in two trim levels: base and LX, with the latter forming the majority of non-fleet sales. In addition, the Crown Victoria P71 replaced the fleet-market "S" designation in 1993; the P71 was marketed exclusively for law-enforcement sales.

    As with the Mercury Grand Marquis, a driver airbag was standard equipment and a passenger airbag was added as an option during later 1991 production. It later became standard in 1993 for the 1994 model year. A popular feature were the anti-lock brakes and low-speed traction control. For 1996, a single-key entry system became standard, along with a hidden audio antenna, rear window defroster and tinted glass. Automatic climate control and a JBL audio system became available on the LX.

    Touring Sedan
    For 1992, Ford introduced the Crown Victoria Touring Sedan as a performance-oriented flagship trim. The Touring Sedan featured a number of suspension and handling improvements over the Crown Victoria LX, featuring the heavier-duty suspension components of the police-package version, and also including wider tires, rear air suspension, removal of the speed limiter, and a 210 hp dual-exhaust variant of the 4.6 L V8. Optional features included speed-sensitive steering and larger-diameter sway bars. Distinguished by its standard two-tone exterior paint scheme (with painted alloy wheels), the Touring Sedan featured a unique leather interior with every feature available on a Crown Victoria at the time. For a lower price, Ford offered the performance upgrades of the Touring Sedan on the LX as the Handling and Performance Package alongside a separate towing package. The Touring Sedan would be a one-year-only model, as it was discontinued after 1992. However, the Handling and Performance Package remained an option in various forms until 2007.

    Source: Wikipedia
    Last edited by Man of Steel; 12-23-2020 at 11:18 PM.

  2. #2
    Join Date
    Sep 2006
    Location
    The Netherlands
    Posts
    4,218
    Ford Crown Victoria (1st gen) #2

  3. #3
    Join Date
    Sep 2006
    Location
    The Netherlands
    Posts
    4,218
    Ford Crown Victoria (1st gen) #3

  4. #4
    Join Date
    Sep 2006
    Location
    The Netherlands
    Posts
    4,218
    Ford Crown Victoria (1st gen) #4

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Ford Crown Victoria (2nd gen - EN114) 1997-2011
    By smxi in forum Matt's Hi-Res Hide-Out
    Replies: 10
    Last Post: 12-28-2020, 12:42 PM
  2. Ford LTD Crown Victoria 1980-1991
    By smxi in forum Matt's Hi-Res Hide-Out
    Replies: 4
    Last Post: 12-23-2020, 11:06 PM
  3. Volvo 850 (854/855) 1991-1997
    By Matt in forum Matt's Hi-Res Hide-Out
    Replies: 31
    Last Post: 03-06-2020, 12:52 PM
  4. Ford Crown Victoria Police Interceptor
    By Ziostilon in forum General Automotive
    Replies: 583
    Last Post: 02-06-2010, 07:47 PM
  5. Mazda MX-6 (2nd gen) 1991–1997
    By smxi in forum Matt's Hi-Res Hide-Out
    Replies: 3
    Last Post: 09-27-2005, 06:06 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •