3300 lg7 in a 1994 Chevrolet Beretta
I moved the post it seemed like a good idea.

I wanted to put a 3300 lg7 (from a 1989 Oldsmobile Cutlass Ciera) in a 1994 Chevrolet Beretta that came with a 2.2L (heard its been done before)

any thoughts on this engine the 3.3?
3300 (LG7) A smaller 3.3 L 3300 was introduced in 1989 and produced through 1993. It is effectively a lower-deck version of the 3800, with a smaller 3.7 in (93.98 mm) bore and 3.16 in (80.26 mm) stroke for 3,340 cc (204 cu in).[3] Like the 3800, it used a cast iron block and heads, push rods, and hydraulic lifters. Unlike the 3800, however, it used a batch-fire injection system rather than sequential injection, as evidenced by the lack of a cam position sensor. It also did not have a balance shaft. Power output was 160 hp (119 kW) at 5,200 rpm and 185 lbft (251 Nm) at 2,000 rpm with a 5,500 rpm redline.

I haven't been able to find much but what i have heard has all been glowing reviews. but ti didn't have a long production period (4 years)

any thoughts on the swap it's self or the Beretta? All ideas are vary appreciated

Here is the info I've been looking at

Thank you for your time!