Results 1 to 10 of 10

Thread: lambo door tut requested by islero

  1. #1
    Join Date
    Aug 2004
    Location
    Toronto Canada
    Posts
    2,093

    lambo door tut requested by islero

    lol heres the newb version of lambo doors
    so messy eh?

    anywayz . i know A LOT of u can do a better tut than this. and with lesser steps

    1) choose a car.
    2) lasso / highlight the door.
    3) ctrl+c to copy and then ctrl+n, set background to transparent. and paste it
    4) find a pic at same angle. lol i cant believe i was able to find another diablo
    (no point to open doors when u have the same car with doors opened, but......still a tutorial...)
    Last edited by illusionest; 10-09-2008 at 06:05 PM.

  2. #2
    Join Date
    Aug 2004
    Location
    Toronto Canada
    Posts
    2,093
    5) lasso / highlight the interior
    6) paste it on the original, ctrl+t to play around with it, choose destort, skew, blah blah blah
    7) after, highlight the left overs and hit delete
    8) ctrl+shift+e to flatten, then go back to the original door with transparent background, select all, copy, go back to the other one, and paste.
    Last edited by illusionest; 10-09-2008 at 06:05 PM.

  3. #3
    Join Date
    Aug 2004
    Location
    Toronto Canada
    Posts
    2,093
    9) after u paste the original door on, skew, destort, adjust angle, blah blah until its around half way opened.
    10) on the same layer, lower the opacity and (like before) trim the parts u dont want overlapped
    11) on the same layer, get the burn tool out and with a small brush get a lil shadow.
    12) and now ur done! k, yes, i know sum of u guyz can do better. lol

    k, the following is to open the window. just remember not to close the finished copy.

    13) select how much u want the window opened
    Last edited by illusionest; 10-09-2008 at 06:05 PM.

  4. #4
    Join Date
    Aug 2004
    Location
    Toronto Canada
    Posts
    2,093
    14) get the history brush out, and take that part out.
    15) ctrl+d to un-highlight, and along the edges make a very close highlight (er, a strip)
    16) get out the dodge tool, and with 2 swipes u should get it.
    17) and ur done!


    lol i just found out the interior is a bit off. o well.
    u get the point
    Last edited by illusionest; 10-09-2008 at 06:05 PM.

  5. #5
    Join Date
    Aug 2003
    Location
    Perth, Australia
    Posts
    388
    thats a pretty good effort! but yeah... i COULD whinge but theres no way in hell i could do anything as good as that, nice work

  6. #6
    Join Date
    Aug 2004
    Location
    In a shoe box, Auckland, NZ
    Posts
    1,710
    Not bad for a quick, simple tutorial. Its all you need to see basically. I guess you can add more steps if i think its necessary too. Good stuff illu.

  7. #7
    Join Date
    Aug 2004
    Posts
    406
    Illu, that tut was brilliant ! I cant thank you enuf, man, thanks so much for spending your time!!

  8. #8
    Join Date
    Aug 2004
    Location
    Toronto Canada
    Posts
    2,093
    no problem..
    this might help sum other new choppers out there

    feel free to ask if u neeed more help

  9. #9
    Join Date
    Feb 2004
    Location
    Manchester, England
    Posts
    2,454
    Good try, the angles off abit.

  10. #10
    Join Date
    Aug 2003
    Location
    NEW YORK
    Posts
    6,985
    illu this would make a nice gif for an avatar, if you a lambo fan. Good job
    John says:
    so i had to dump acid into the block tank today
    i'm afraid to fap
    cause i got it on my hands

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •