Go to Ultimatecarpage.com

Go Back   Ultimatecarpage.com forums > Automotive forums > Technical forums


Reply
 
Thread Tools Display Modes
  #1  
Old 04-12-2015, 12:27 PM
karabiner98k's Avatar
karabiner98k karabiner98k is offline
Novice
 
Join Date: Aug 2009
Posts: 59
MAP Sensor

Hi guys,

I have read a lot about car's MAP sensor and it's function but there are some areas that are not completely understood yet!

Let me put it this way:

My car's MAP sensor reads 337 mbar (millibar) @ idle (800 RPM).
When i open the throttle, the reading DROPS (for example at 2500 RPM it shows around 260 mbar)

With the engine OFF and ignition ON it reads exactly the barometric (atmospheric) pressure of our city which is about 870 mbar.

My car is a Peugeot.

The problem is that i saw in a video that MAP sensor reading of a Ford was the exact opposite of my car! When he opened the throttle the reading went HIGHER not LOWER!

(both cars have naturally aspirated engines)

I think that my car's MAP shows manifold VACUUM and that Ford's MAP shows manifold PRESSURE not vacuum.

I know that highest vacuum is created in high rpm and closed throttle (like going downhill)

In this situation my car shows highest numbers and that Ford shows lowest numbers.

But someone told me that my car isn't showing vacuum, it shows Absolute Pressure. Someone else said something about Relative Pressure.

My interpretation of my own car is this:

@ idle the MAP reads 337 mbar. It means that @ idle my manifold pressure is 337 mbar lower than atmospheric pressure so my REAL manifold pressure is 533 mbar (870 - 337 = 533).

So my MAP does NOT directly show my manifold pressure but it shows how much my manifold pressure is lower than ambient pressure.

Am i correct?

Please shed some more light into these concepts.
Reply With Quote
  #2  
Old 04-12-2015, 04:33 PM
crisis's Avatar
crisis crisis is offline
Space Modulator
 
Join Date: Apr 2003
Posts: 6,153
Adelaide
Perhaps this?
MAP Sensor VS. Maf Sensor | Tuning MAP sensors | Evo Maf
__________________
"A string is approximately nine long."
Egg Nogg 02-04-2005, 05:07 AM
Reply With Quote
  #3  
Old 08-23-2015, 07:56 PM
spiderman spiderman is offline
Novice
 
Join Date: Oct 2012
Posts: 4
You have a MAP sensor. 870 with engine off is correct.
337 mbar at idle sounds about right.
260 mbar at 2,500 sounds about right.
To see an increase, you need to snap the throttle from idle. You will only see the increase while the engine is accelerating. You are using the inertia of the engine to act as a "load". Accelerating on road or driving up a hill will allow you to hold large throttle openings for longer periods to see an increased MAP.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Sensor GTR lfb666 General Automotive 4 02-26-2014 12:09 AM
Call Of Duty 4 whiteballz Gaming 381 06-02-2009 03:34 PM
Student arrested & expelled for making a map of his school for shooter game NuclearCrap Gaming 38 05-25-2007 10:26 AM
My map of the Nurburgring RISE AGAINST Multimedia 10 03-02-2006 07:06 PM
Mass airflow sensor gtface Technical forums 11 12-04-2005 06:56 PM



All times are GMT -7. The time now is 04:19 PM.

 

1998 - 2018 Ultimatecarpage.com