Page 2 of 4 FirstFirst 1234 LastLast
Results 16 to 30 of 47

Thread: what do u think about the LJ Torana

  1. #16
    Join Date
    Apr 2003
    Location
    Adelaide
    Posts
    6,153
    Quote Originally Posted by SlickHolden

    That will go great even stock.
    It is unlikely to stay very stock. He is getting it set up to be registered though. When he got it it came with a 202 and triples. He claimed he would just put that in and see how it went. I told him he would have a V8 in it in no time!
    I won.
    "A string is approximately nine long."
    Egg Nogg 02-04-2005, 05:07 AM

  2. #17
    Join Date
    Sep 2004
    Location
    Adelaide, Australia
    Posts
    2,496
    Quote Originally Posted by crisis
    My brother in law is building one with a LS2 and a six speed. Has the body tubbed and painted already and a kit to mount the drive line.

    The thing I remember about them is the off centre driving position. Never really did it for me but I liked the bigger Holdens and the LX Torrries better.
    That will go very hard even stock, with a tune,cam etc 300rwkw will be easily acheived. Best of all it will be reliable and wont run like a pig compared to an old school V8 with cam,big carby etc. The only way to go is late model V8 with engine management.
    SA IPRA cars 15, 25, 51 & 77
    Sharperto Racing IP Corollas
    http://www.sharperto.com.au/

  3. #18
    Join Date
    May 2004
    Location
    Australia.
    Posts
    12,833
    Quote Originally Posted by crisis
    It is unlikely to stay very stock. He is getting it set up to be registered though. When he got it it came with a 202 and triples. He claimed he would just put that in and see how it went. I told him he would have a V8 in it in no time!
    I won.
    12's stock the sub 10's are in danger.
    Seen a VN fitted with LS1 stock and it was doing sub 13's.
    "Just a matter of time i suppose"

    "The elevator is broke, So why don't you test it out"

    "I'm not trapped in here with all of you, Your all trapped in here with me"

  4. #19
    Join Date
    Apr 2003
    Location
    Adelaide
    Posts
    6,153
    Quote Originally Posted by charged
    That will go very hard even stock, with a tune,cam etc 300rwkw will be easily acheived. Best of all it will be reliable and wont run like a pig compared to an old school V8 with cam,big carby etc. The only way to go is late model V8 with engine management.
    Yep. He is gonna run it on the road so it should go fine for that then come drag days we are all gonna party!
    "A string is approximately nine long."
    Egg Nogg 02-04-2005, 05:07 AM

  5. #20
    Join Date
    Apr 2003
    Location
    Adelaide
    Posts
    6,153
    Quote Originally Posted by SlickHolden
    12's stock the sub 10's are in danger.
    Seen a VN fitted with LS1 stock and it was doing sub 13's.
    We have kind of a contact within the dealership area who helps a bit too.
    "A string is approximately nine long."
    Egg Nogg 02-04-2005, 05:07 AM

  6. #21
    Join Date
    Sep 2004
    Location
    Adelaide, Australia
    Posts
    2,496
    Quote Originally Posted by crisis
    Yep. He is gonna run it on the road so it should go fine for that then come drag days we are all gonna party!
    Sadly drag days are very few at the moment, there hasnt been a meet at AIR for sometime as the timing systems arent up to spec for ANDRA and theres no drags planned for the near future. From what Ive been told from someone in ANDRA it may never run drags again. The state/fed govt needs to build a dedicated motorsport complex similar to WSID that incorperates drag,drift and circuit events.
    Last edited by charged; 09-21-2006 at 11:37 PM.
    SA IPRA cars 15, 25, 51 & 77
    Sharperto Racing IP Corollas
    http://www.sharperto.com.au/

  7. #22
    Join Date
    May 2004
    Location
    Australia.
    Posts
    12,833
    Quote Originally Posted by crisis
    We have kind of a contact within the dealership area who helps a bit too.
    LS1 edit
    I like todays V8's they can be powerful but smooth enough for mum and wife to drive around without giving them whiplash.
    Take yesterdays cars My cousins 308 was rumbling over the place.
    "Just a matter of time i suppose"

    "The elevator is broke, So why don't you test it out"

    "I'm not trapped in here with all of you, Your all trapped in here with me"

  8. #23
    Join Date
    Sep 2006
    Posts
    45
    have u seen the 5.7L HEMI from jeep

  9. #24
    Join Date
    May 2004
    Location
    Australia.
    Posts
    12,833
    Isn't that the same hunk of lump in the 300c?
    "Just a matter of time i suppose"

    "The elevator is broke, So why don't you test it out"

    "I'm not trapped in here with all of you, Your all trapped in here with me"

  10. #25
    Join Date
    Apr 2003
    Location
    St Marys Western Sydney
    Posts
    20,953
    Yes, its originally a Chrysler engine but considering Jeep are owned by Chrysler, they use it also. Much like how Holden now uses GM's engines.
    I am the Stig

  11. #26
    Join Date
    Jan 2004
    Location
    Sydney, Down Under
    Posts
    8,833
    Quote Originally Posted by SlickHolden
    Isn't that the same hunk of lump in the 300c?
    Exactly the same
    Faster, faster, faster, until the thrill of speed overcomes the fear of death...
    – Hunter Thompson

  12. #27
    Join Date
    Sep 2006
    Posts
    45
    I know that the HEMI is from Chrysler. it's in the dodge's to (i think).

  13. #28
    Join Date
    Jan 2004
    Location
    Sydney, Down Under
    Posts
    8,833
    Quote Originally Posted by Holden rocks
    I know that the HEMI is from Chrysler. it's in the dodge's to (i think).
    Chrysler owns Dodge
    Faster, faster, faster, until the thrill of speed overcomes the fear of death...
    – Hunter Thompson

  14. #29
    Join Date
    Apr 2006
    Location
    Mudjimba Beach, Queensland, OZ
    Posts
    9
    A little LJ with a HFV6 would be a nice mix. Short rack steering would be a welcome addition resulting in a pretty impressive Rally (tarmac) car with fairly good balance. I thought an LS anything would be a bit heavy in the nose of a little torry (LJ anyway)
    A sweet manual gear change is like a fine golf shot....unfortunately I suck at golf.

  15. #30
    Join Date
    Apr 2003
    Location
    Adelaide
    Posts
    6,153
    Quote Originally Posted by charged
    Sadly drag days are very few at the moment, there hasnt been a meet at AIR for sometime as the timing systems arent up to spec for ANDRA and theres no drags planned for the near future. From what Ive been told from someone in ANDRA it may never run drags again. The state/fed govt needs to build a dedicated motorsport complex similar to WSID that incorperates drag,drift and circuit events.
    He will be spewing. Still as long as they don’t cancel them we are in no hurry. It has been standing there dormant for a few weeks now. The government really should support legitimate controlled drag events. Unfortunately they are all emotional about hoon drivers and donuts. They think dropping a burnout or a donut is extremely dangerous. I agree speed related hoon behaviour should be controlled but I would like to see statistics for death or serious injury dropping a burnout or doing a donut.
    "A string is approximately nine long."
    Egg Nogg 02-04-2005, 05:07 AM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Holden Torana
    By Matt in forum Matt's Hi-Res Hide-Out
    Replies: 7
    Last Post: 06-11-2013, 11:53 PM
  2. Classic Australian Muscle Cars Specs & Pics
    By motorsportnerd in forum Classic cars
    Replies: 64
    Last Post: 03-07-2009, 07:38 PM
  3. Holden Torana Concept
    By shockwaveracing in forum Matt's Hi-Res Hide-Out
    Replies: 30
    Last Post: 08-18-2006, 03:33 AM
  4. My new LX Torana
    By Hezath in forum User's rides
    Replies: 13
    Last Post: 07-09-2005, 10:20 AM
  5. Torana - Could it go global with Commodore?
    By fpv_gtho in forum General Automotive
    Replies: 162
    Last Post: 11-14-2004, 10:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •