Go to Ultimatecarpage.com

Go Back   Ultimatecarpage.com forums > General forums > Multimedia > Matt's Hi-Res Hide-Out


Reply
 
Thread Tools Display Modes
  #1  
Old 04-12-2005, 08:45 PM
Matt's Avatar
Matt Matt is offline
Size Queen
 
Join Date: Apr 2003
Posts: 11,267
Wichita, Kansas USA
Send a message via ICQ to Matt Send a message via AIM to Matt Send a message via MSN to Matt Send a message via Yahoo to Matt
Mercedes-Benz Racing Car Transporter

Phoenix from the ashes

Comeback after more than 40 years

The manufacture of the racing car transporter had already been a bold and visionary project in its "first life"; this was almost topped by the plan to reconstruct this witness to Mercedes-Benz motor sport history. Since there were hardly any drawings or documents relating to the racing car transporter's design, the relevant specifications had to be compiled in scrupulousy detailed work.

The scrapping had proved to be a painful loss which over the years did not give the people responsible in the Mercedes-Benz Museum any peace. Especially as they received inquiries from all over the world time and again, asking about the famous racing car transporter's whereabouts and whether it would be possible to see or drive it.

Extensive research within the company finally revealed that there were only a few records on this vehicle to be found in the Corporate Archives and contemporaries' documents.

A great help proved to be staff reports on what happened at the time. In this way, important facts were reestablished, photos obtained and many details brought back into the light of day. Design drawings, however, were simply non-existent. Like so many other one-off cars at Daimler-Benz, the racing car transporter had been built without any design drawings being available.

Finally, in 1993, Messrs. MIKA GmbH in Mölln in the north of Germany, specialists in the restoration of motor vehicles, were given the honorable task by the Mercedes-Benz Museum to rebuild the racing car transporter in true-to-the-original style based upon photos and data available - a challenge they mastered in admirable fashion. Almost 6000 working hours were spent on redesigning and building the racing car transporter. This meant seven years of fiddling, of elaborating the steering and gearshift geometries, of designing the cable harness, of manufacturing the cab's rear windows and all the details to be found under the sheet metal skin.

As is so often the case, a very special delight for the MIKA staff was a tiny detail: the Mercedes star which once adorned the original's rear end is still available today - and its curvature fitted the copy perfectly. It is, incidentally, the 300 S's star.

For safety reasons, a small deviation from the original was approved: the front wheels are equipped with 1989 SL disc brakes, and the disc brake between propeller shaft and differential was omitted. All other technical data and features like engine output, axle configuration, transmission spacing, exterior dimensions, bucket-type seats complete with upholstery fabrics, the location of the rev counter, the dimensions of the access rails, etc. are precisely the same as on the original transporter.

When the replica was presented, a person who knew the original vehicle said "How wonderful it's back here with us," certain vibrations in his voice indicating that he was glad seeing something missed for such a long time come home again.
__________________
I'm going to eat breakfast. And then I'm going to change the world.
Reply With Quote
  #2  
Old 04-12-2005, 08:47 PM
Matt's Avatar
Matt Matt is offline
Size Queen
 
Join Date: Apr 2003
Posts: 11,267
Wichita, Kansas USA
Send a message via ICQ to Matt Send a message via AIM to Matt Send a message via MSN to Matt Send a message via Yahoo to Matt
The fastest racing car transporter in the world

The original's technical data


Engine:


Stuttgart, Oct 25, 2001
Water-cooled six-cylinder in-line unit with di-rect injection, bore x stroke: 85 x 88 mm, displacement: 2998 cm3, output: 192 hp at 5500/min, max. torque: 25.8 mkg at 4700/min, compression ratio: 8.3:1, electric system: 12 volt, fuel consumption: 25 liters/100 km.
Power transmission:

Rear-wheel drive, Daimler-Benz single-plate dry clutch, fully synchronized four-speed transmission with involute profiles; transmission ratios: 1st gear: 3.44, 2nd gear: 2.29, 3rd gear: 1.53, 4th gear: 1.0, reverse: 4.67; rear axle with hypoid gearing.

Running gear:

300 S frame extended at the front and rear; front axle with wishbones and coil springs, rear swing axle with lowered, separate pivot points for the two axle carriers, torsion bar stabilizer, four drum brakes with brake boos-ter, engine brake, propeller shaft disc brake; 5.5 K x 15 wheels with 7.60 x 15 tires. Fuel tank with a capacity of 150 liters.

Dimensions /weights:

3050 mm wheelbase; 6750 mm long, 2000 mm wide, 1750 mm high; track width of 1480 mm at the front and 1525 mm in the rear; dry weight: 1865 kg, gross weight in ready-to-drive condition: 2100 kg.

Performance:

Top speed of approx. 170 km/h.
Attached Images
File Type: jpg 360565futuristi_rennwagen_ed9.jpg (143.4 KB, 24 views)
File Type: jpg 360539futuristi_rennwagen_ed7.jpg (152.6 KB, 20 views)
File Type: jpg 360331Star_im_Lager_bild2.jpg (147.5 KB, 47 views)
File Type: jpg 374970front_ed.jpg (175.8 KB, 50 views)
__________________
I'm going to eat breakfast. And then I'm going to change the world.
Reply With Quote
  #3  
Old 04-12-2005, 08:50 PM
Matt's Avatar
Matt Matt is offline
Size Queen
 
Join Date: Apr 2003
Posts: 11,267
Wichita, Kansas USA
Send a message via ICQ to Matt Send a message via AIM to Matt Send a message via MSN to Matt Send a message via Yahoo to Matt
Crowd-puller in the paddock

The racing car transporter in operation

The racing car transporter was a sensation on European roads and motorways during its active time from mid-1954 until the fall of 1955, when Daimler-Benz withdrew from racing again. The vehicle even became a star in the paddocks where it often attracted larger crowds than the racing cars

The 300 SLR and its transporter were shipped across the Atlantic and caused quite a sensation at every one of the exhibitions at which the combination was displayed. Legends were woven around the combination's top speed until someone painted "Max. Speed 105 m.p.h." on its rear fenders. This put a stop to the questions, but not to people's amazement. In late 1957, the fast transporter returned to home ground, slightly the worse for wear but still in good condition overall.

The Mercedes-Benz Museum was to become the final place of rest for the aging but still fascinating transporter - together with a 300 SLR already waiting for it. However, the team of transporter and racing sports car proved to be too heavy for the old museum's floors. Plans to reconstruct the museum additionally prevented the combination from being displayed.

And so it happened that the once proud racing car transporter had to do duty in the testing department until it was beyond repair and finally scrapped at Rudolf Uhlenhaut's command in December 1967.
Attached Images
File Type: jpg 360433futuristi_rennwagen_ed1.jpg (214.5 KB, 32 views)
File Type: jpg Resize of 605306Renntransporter.jpg (247.8 KB, 70 views)
File Type: jpg Resize of 359835verwegener_gedanke_bild1.jpg (264.1 KB, 63 views)
File Type: jpg 360314Star_im_Lager_bild1.jpg (282.6 KB, 54 views)
__________________
I'm going to eat breakfast. And then I'm going to change the world.
Reply With Quote
  #4  
Old 04-12-2005, 08:51 PM
Matt's Avatar
Matt Matt is offline
Size Queen
 
Join Date: Apr 2003
Posts: 11,267
Wichita, Kansas USA
Send a message via ICQ to Matt Send a message via AIM to Matt Send a message via MSN to Matt Send a message via Yahoo to Matt
A bold idea

A one-off vehicle from the Mercedes-Benz testing workshops head

The legendary Silver Arrows were not the only vehicles that were the talk of the town in the early nineteen-sixties. The Mercedes-Benz racing department also hit the headlines off the racetracks, with its "fastest racing car transporter in the world".

In 1952, the board of management of Daimler-Benz decided that in two years time, 1954, it would return to Grand Prix racing. The company's racing department, which had already set up the extremely successful 300 SL racing sports cars in 1952, set out to translate the plans for a Grand Prix car - internally designated W 196 - into reality.

Parallel to this, it was, of course, essential to equip a workshop vehicle for servicing and repairs alongside the racetrack, and to build a truck for transporting the racing cars. Neubauer couldn't get the idea of a fast racing car transporter out of his mind.

The idea was presented to master craftsman Hägele, with the final words of encouragement being: "Come up with something good!"

Hägele was in charge of a test department in which chassis and running gear technicians, engine specialists and bodymakers produced prototypes.

The demands made on the transporter were specified easily enough: it was to be fast - very fast even when laden with a Grand Prix car or SLR racing sports car. It therefore had to have plenty of power and equally powerful brakes. It is no longer possible to retrace the individual steps in the production of the racing car transporter in every detail, but it is known that the vehicle was a joint development of Hägele's team.

Engineer Hennige finally suggested the combination of the X-shaped tubular frame from the 300 S, the highperformance engine from the 300 SL and interior fittings from the 180. Rudolf Uhlenhaut gave the green light and the team set out to tackle the work.
Attached Images
File Type: jpg 360346Star_im_Lager_bild3.jpg (295.5 KB, 33 views)
File Type: jpg Resize of 4025255.jpg (297.6 KB, 35 views)
File Type: jpg Resize of 40255767184.jpg (329.7 KB, 43 views)
File Type: jpg 360581futuristi_rennwagen_ed10.jpg (370.7 KB, 21 views)
__________________
I'm going to eat breakfast. And then I'm going to change the world.
Reply With Quote
  #5  
Old 04-12-2005, 08:54 PM
Matt's Avatar
Matt Matt is offline
Size Queen
 
Join Date: Apr 2003
Posts: 11,267
Wichita, Kansas USA
Send a message via ICQ to Matt Send a message via AIM to Matt Send a message via MSN to Matt Send a message via Yahoo to Matt
Futuristic design concept

Perfection by tradition


The designers of the racing car transporter succeeded in achieving the impossible: they created a truly unique car in terms of both looks and technical perfection. And they provided the racing deparment with exactly what the latter needed: an incomparably fast vehicle for transporting racing cars.

The X-shaped tubular frame of the 300 S was extended at the front and rear to provide ample space for a Mercedes-Benz racing car on the load platform. The direct-injection SL engine was installed just above the front axle, as 'in real life'. A synchronized four-speed transmission with involute profiles and a Daimler-Benz single-plate dry clutch were both flanged to the engine. At the front, a double wishbone axle with coil springs and Fichtel & Sachs shock absorbers was installed, at the rear a swing axle with a hypoid crown wheel and pinion assembly, lowered and separate pivot points for the two axle carriers, coil springs, an additional torsion bar spring and also F & S shock absorbers. At 3050 millimeters, the wheel-base was impressively long.

Hydraulic drum brakes on all four wheels and a pneumatic brake booster from Bosch reliably decelerated the vehicle whose laden weight was just under 3000 kilograms.

Safety was further enhanced by a disc brake installed between propeller shaft and differential as well as by an exhaust brake - a new feature on a passenger car engine. The engine itself was very special: in view of the heavy-duty work lying ahead of it, the output of the original three-liter six-cylinder in-line engine from the 300 SL was reduced from 215 to 192 hp.

With this output and its high torque of 25.8 mkg at 4700/min, this engine easily gave the racing car transporter a top speed of 160 - 170 kilometers per hour - depending on what it was carrying on its back.

All of these components vanished underneath a sheet metal skin that served as an all-time memorial to the imagination, creativity, commitment and skills of the bodymakers. Experts realize immediately that the center section of the driver's cab - from the windshield to the rear edge of the door - was adopted from the 180 production model, only that everything was much wider. The front end, set at a steep angle and rounded, flowed into an SL-type coolant-air intake with a Mercedes star right in the center. The front end's rounded contours were delineated at the sides by rudimentary fenders, unmistakable features of the 180, with integrated headlights and fog lights, and at the front by a sweeping chrome bumper, with large bumper guards, wrapping around the corners of the cab.

The engineers succeeded in creating a technical masterpiece, a unique vehicle whose origins were easy to identify. No matter what you looked at, the bodywork, the engine or the frame, the racing car transporter was unmistakably a Mercedes. From roughly the upper seat edge level, the rear section of the cab bulged outwards towards the rear, to taper towards the center. Rear glass screens curved at two levels testified to the proud achievements of the glazing artists. The front end of an SLR or Formula One car fitted underneath this nose-like shape like a hand in a glove. Behind the cab mounted in a low position and ahead of the front axle, the transport section of this remarkable vehicle began - as avantgarde as everything else on this transporter. The frame, engine, radiator, axles and fuel tank all vanished under complete paneling. The front and rear fenders elegantly extended far towards the rear, enclosing the wheels in an aerodynamically efficient manner. With their flowing lines, they unobtrusively integrated the load and its carrier into an entity. The front and rear fenders were linked by inward-curving paneling flowing into the load platform. The recessed space between the axles accommodated a spare wheel on each side, fixed at an angle and quickly retrievable when required.

A very clever idea was integrated in that tripods were firmly mounted on the spare wheel hub caps. These elements served as supports for the U-shaped two-part access rails for the racing car which was strapped down by steel ropes on the load platform, its wheels resting in firmly installed upward-curving rails. The access rails were accommodated in a well secured position between the wheel recesses during transport.

The fully paneled rear end was reminiscent of the 300 SLR, indicating the vehicle's purpose from this perspective as well. The rear was, of course, also trimmed with a single-part chrome bumper since the vehicle's creators felt that their design was a passenger car more than anything else, albeit one for the special purpose of transporting a racing car.

So there it was, in mid-1954, being 6750 millimeters long, 2000 millimeters wide, just 1750 millimeters high: a dynamic appearance expressing power, wrapped in extravagant bodywork that was, of course, painted in Mercedes-Benz blue.

A vehicle with a "storming-ahead" appeal, ready to go and looking fast even when stationary. A retired member of staff remembers that "For us in the racing department, this vehicle was a blessing. We often had a few more hours to complete the setup or the last modifications on a racing car with greater care and less pressure. By the same token, a damaged or defective car was returned to us more quickly, giving us more time for repairs. After every race, the cars were dismantled and checked, defective parts were replaced, repaired or modified and adapted to the relevant driver".
Attached Images
File Type: jpg 360475futuristi_rennwagen_ed4.jpg (374.2 KB, 19 views)
File Type: jpg Resize of 40254010.jpg (377.0 KB, 43 views)
File Type: jpg Resize of 40258870489.jpg (394.8 KB, 49 views)
File Type: jpg Resize of 40248813.jpg (396.4 KB, 43 views)
__________________
I'm going to eat breakfast. And then I'm going to change the world.
Reply With Quote
  #6  
Old 04-12-2005, 08:56 PM
Matt's Avatar
Matt Matt is offline
Size Queen
 
Join Date: Apr 2003
Posts: 11,267
Wichita, Kansas USA
Send a message via ICQ to Matt Send a message via AIM to Matt Send a message via MSN to Matt Send a message via Yahoo to Matt
In 1955, the Daimler-Benz racing department created a speedy transporter to take racing cars to the racetrack or defective racing cars back to the plant for repairs – both in next to no time. With this vehicle, the Mercedes-Benz team caused a stir even off the racetracks. On the extended frame of the luxurious Mercedes-Benz 300 S, this utility vehicle was powered by the 192 hp three-liter engine from the 300 SL Gullwing super-sports car, which accounted for its impressive top speed of 165 km/h.

Since the original had been scrapped in the late 1960s, the Mercedes-Benz Classic Center set up a true-to-the-original replica of the transporter with steel/aluminum bodywork in several years of painstaking work.

Technical data

Number of cylinders: 6
Displacement: 2,996 cc
Output: 192 hp at 5,500/min
Weight: 2,100 kg
Top speed: 165 km/h
Attached Images
File Type: jpg 360242phoenix-renn_alt_4c_sw.jpg (408.3 KB, 41 views)
File Type: jpg Resize of 3861606.jpg (418.1 KB, 34 views)
File Type: jpg Resize of 40257670492.jpg (426.5 KB, 38 views)
File Type: jpg Resize of 4025150.jpg (429.8 KB, 44 views)
__________________
I'm going to eat breakfast. And then I'm going to change the world.
Reply With Quote
  #7  
Old 04-12-2005, 09:00 PM
Matt's Avatar
Matt Matt is offline
Size Queen
 
Join Date: Apr 2003
Posts: 11,267
Wichita, Kansas USA
Send a message via ICQ to Matt Send a message via AIM to Matt Send a message via MSN to Matt Send a message via Yahoo to Matt
Mercedes-Benz Racing Car Transporter #7
Attached Images
File Type: jpg 360507futuristi_rennwagen_ed5.jpg (431.4 KB, 19 views)
File Type: jpg Resize of 38613912.jpg (432.6 KB, 22 views)
File Type: jpg Resize of 38613011.jpg (434.3 KB, 27 views)
File Type: jpg Resize of 3861482.jpg (452.1 KB, 28 views)
__________________
I'm going to eat breakfast. And then I'm going to change the world.
Reply With Quote
  #8  
Old 04-12-2005, 09:01 PM
Matt's Avatar
Matt Matt is offline
Size Queen
 
Join Date: Apr 2003
Posts: 11,267
Wichita, Kansas USA
Send a message via ICQ to Matt Send a message via AIM to Matt Send a message via MSN to Matt Send a message via Yahoo to Matt
Mercedes-Benz Racing Car Transporter #8
Attached Images
File Type: jpg Resize of 3861707.jpg (453.2 KB, 23 views)
File Type: jpg Resize of 3861211.jpg (457.3 KB, 22 views)
File Type: jpg Resize of 3861808.jpg (461.7 KB, 21 views)
File Type: jpg Resize of 4024979.jpg (474.5 KB, 34 views)
__________________
I'm going to eat breakfast. And then I'm going to change the world.
Reply With Quote
  #9  
Old 04-12-2005, 09:02 PM
Matt's Avatar
Matt Matt is offline
Size Queen
 
Join Date: Apr 2003
Posts: 11,267
Wichita, Kansas USA
Send a message via ICQ to Matt Send a message via AIM to Matt Send a message via MSN to Matt Send a message via Yahoo to Matt
Mercedes-Benz Racing Car Transporter #9
Attached Images
File Type: jpg Resize of 4024533.jpg (476.9 KB, 43 views)
__________________
I'm going to eat breakfast. And then I'm going to change the world.
Reply With Quote
  #10  
Old 04-12-2005, 11:53 PM
Fumacher's Avatar
Fumacher Fumacher is offline
Enthusiast
 
Join Date: Aug 2004
Posts: 1,547
The Netherlands
Send a message via MSN to Fumacher
what if the driver is very heavy.....would the front of the car touch the road
__________________
FERRARI RULEZZZ
Reply With Quote
  #11  
Old 04-12-2005, 11:55 PM
whiteballz's Avatar
whiteballz whiteballz is offline
Furniture
 
Join Date: Feb 2004
Posts: 11,112
Western Sydney, Australia
Send a message via MSN to whiteballz
yeah, when no load is on the back it might be different.
__________________
Weekly Quote -

Dick
Reply With Quote
  #12  
Old 06-03-2005, 09:32 AM
drakkie's Avatar
drakkie drakkie is offline
Fanatic
 
Join Date: Mar 2004
Posts: 7,827
Eindhoven, The Netherlands
Mercedes-Benz Racing car transporter

1954 mercedes-benz racing transporter with current day Formula 1 car.


and two weird dudes
Reply With Quote
  #13  
Old 06-03-2005, 09:37 AM
Quiggs's Avatar
Quiggs Quiggs is offline
Fanatic
 
Join Date: Jul 2003
Posts: 7,992
Northampton, Pennsylvania
Send a message via AIM to Quiggs Send a message via MSN to Quiggs
On the 'Ring no less.
__________________
[O o)O=\x/=O(o O]

The things we do for girls who won't sleep with us.

Patrick says:
dads is too long so it wont fit
so i took hers out
and put mine in
Reply With Quote
  #14  
Old 06-03-2005, 09:38 AM
dul's Avatar
dul dul is offline
Rookie
 
Join Date: May 2005
Posts: 103
Helsinki, Finland
It's over 50 years old and they're still using it.
I thought Mercedes was rich.

Last edited by dul; 06-03-2005 at 09:42 AM.
Reply With Quote
  #15  
Old 06-03-2005, 10:29 AM
blackcat77's Avatar
blackcat77 blackcat77 is offline
Member
 
Join Date: Aug 2004
Posts: 821
Anderson Indiana
I've got pictures of the transporter with a Mercedes F1 car from the period and that looks good. This just looks stupid.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
a:level project car - "The Big" lfb666 Matt's Hi-Res Hide-Out 7 03-28-2012 06:10 PM
Favorite James Bond Automobile toyota_trevor Car comparison 103 12-16-2008 06:40 AM
Mercedes McLaren P8 bum-man General Automotive 24 10-16-2008 09:27 AM
Most powerful car lfb666 General Automotive 35 09-15-2006 07:13 AM
Jaguar E-Type Roadster Select Edition Racing Matt Matt's Hi-Res Hide-Out 16 10-29-2005 09:56 PM



All times are GMT -7. The time now is 06:02 AM.

 

© 1998 - 2019 Ultimatecarpage.com