Page 1 of 2 12 LastLast
Results 1 to 15 of 24

Thread: I want to go mountain biking

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jul 2003
    Location
    Belgium
    Posts
    1,991

    I want to go mountain biking

    Hi there,

    So I've decided that I need to do something about the sorry state my body is right now. My endurance is f'ed up and my overal physical state sucks. So it's time to do some sports again !
    I think I want to some cycling. Both off and on road. Mostly off road.

    But I would like is some info on the machinery itself. I want to buy myself a great bike. Heck building one myself would be nice as well. It would be another hobby.

    Any pointers ?

  2. #2
    Join Date
    Nov 2004
    Location
    brisbane - sub-tropical land of mangoes
    Posts
    16,251
    um...find mountain. roll down side. hang on?
    it's something i've had a passing interest in but never got around to doing
    of course, the mountainous terrain i visit requires a different set of equipment alltogether but meh
    Andreas Preuninger, Manager of Porsche High Performance Cars: "Grandmas can use paddles. They aren't challenging."

  3. #3
    Join Date
    Sep 2004
    Location
    Perth, Australia
    Posts
    3,560
    Do you just want to assemble it yourself, or really build the frame yourself? If the former then its nice, but WAY more expensive than an off the shelf machine.

    Lots of MtBing opportunities in your area as a rule, but not super rocky. I'd still tend to lean towards a duel suspension frame, but 125mm of travel would be a max. Weight and quality of the components is purely a budget thing.

    I'd recommend hydraulic discs - but not anything from Hayes. Also clipless pedals (Time ATACs will be the best for the mud) will be a massive advantage.
    Chief of Secret Police and CFO - Brotherhood of Jelly
    No Mr. Craig, I expect you to die! On the inside. Of heartbreak. You emo bitch

  4. #4
    Join Date
    Jul 2003
    Location
    Belgium
    Posts
    1,991
    Quote Originally Posted by Cyco View Post
    Do you just want to assemble it yourself, or really build the frame yourself? If the former then its nice, but WAY more expensive than an off the shelf machine.

    Lots of MtBing opportunities in your area as a rule, but not super rocky. I'd still tend to lean towards a duel suspension frame, but 125mm of travel would be a max. Weight and quality of the components is purely a budget thing.

    I'd recommend hydraulic discs - but not anything from Hayes. Also clipless pedals (Time ATACs will be the best for the mud) will be a massive advantage.
    It would be assembling it myself, yes. I don't think I have the know how and equipment to actually make a frame myself. Off the shelf it is !

    There aren't too many rocky or mountainous off road places here. Mostly flat around here, mud a plenty.

    I guess I could start off with a cheap bike and add/replace components as I go, no ? I guess that most bike components are somehow compatible with most bikes ? Installation-wise that is.

    I have an old bike that I could somehow upgrade but the problem with that thing is the frame. It's rather heavy and more road-oriented.
    Last edited by Lagonda; 06-20-2007 at 05:30 AM.

  5. #5
    Join Date
    Mar 2004
    Location
    Victoria, Australia
    Posts
    3,391
    Quote Originally Posted by Lagonda View Post
    It would be assembling it myself, yes. I don't think I have the know how and equipment to actually make a frame myself. Off the shelf it is !

    There aren't too many rocky or mountainous off road places here. Mostly flat around here, mud a plenty.

    I guess I could start off with a cheap bike and add/replace components as I go, no ? I guess that most bike components are somehow compatible with most bikes ? Installation-wise that is.
    I'm assuming that by 'mountain biking' you mean cross-country. Up hills, down hills, and riding on the flat. Seeing as your area isn't all that mountainous you wouldn't be doing much downhilling.

    In this case I recommend a relatively cheap setup, hardtail frame and basic 80mm-100mm fork. Most parts fit most bikes, you've just gotta watch out for sizing on some things. Seatpost sizes are usually bespoke to frame manufacturer, or several. Make sure the seatpost size matches the frame size. Any seat should fit there-on. If you're not spending too much, the wheels will be quick release, so make sure that the forks and wheels are compatible with each other. 20mm forks don't mix well with QR wheels. :P
    Generally on a budget you shouldn't worry about the fork size, but make sure that the bar stem combo fits into each other. Oversized bars with normal sized stem don't mix well either.

    For the rest you shouldn't have too many problems, from personal experience I recommend SRAM and Juicy gear. Rockshox should probably have a relatively budget fork, and the frame really depends on what you're interested in.

  6. #6
    Join Date
    Mar 2004
    Location
    Eindhoven, The Netherlands
    Posts
    7,833
    I'd say buy a cheap bike to start with... Less damage when you wreck it..

  7. #7
    Join Date
    Nov 2006
    Location
    Aberdeen
    Posts
    2,975
    Quote Originally Posted by drakkie View Post
    I'd say buy a cheap bike to start with... Less damage when you wreck it..
    building can be expensive, consider tool cost, plus cost savings are found at the higher end of the market. I would recomend a early to mid range trek or specialized.

    however, remember:
    - good full suspension starts at about 1250 euros, below that its heavy and innefective - think argos
    - good front suspension starts at about 750 euros, below that you get a rubber in a pipe!
    - good v-brakes > entry level disc brakes.

    Hope your mtbing is fun most of all! its all about enjoyment as well as fitness.
    autozine.org

  8. #8
    Join Date
    Apr 2003
    Location
    For Tax Purposes, Cayman Islands
    Posts
    14,579
    Certainly the cheap idea has merit - if you lose interest quickly you're not so out of pocket.

    but if your serious then the high-spec gear might be worthwhile.

    still, sounds pretty cool. i might investigate the idea myself. i just don't look good in lycra is all
    <cough> www.charginmahlazer.tumblr.com </cough>

  9. #9
    Join Date
    Jul 2003
    Location
    Belgium
    Posts
    1,991
    Quote Originally Posted by IBrake4Rainbows View Post
    still, sounds pretty cool. i might investigate the idea myself. i just don't look good in lycra is all
    I wouldn't be wearing lycra that's for sure !

  10. #10
    Join Date
    Feb 2005
    Location
    Barcelona
    Posts
    33,488
    My recomendation is, get something strong. I always ended up breaking my mountain bikes because of too extreme off-roading...
    Lack of charisma can be fatal.
    Visca Catalunya!

  11. #11
    Join Date
    Dec 2005
    Location
    Belgica
    Posts
    540
    in fact the area where you live is great for MTB.
    I did it myself a few years ago in Brecht, St job, Drieboomkesberg...
    but I got fed up with it because I allways messed the bike up.
    ive broken 2 chains, gears allways went wrong.
    but on the other hand , I have this problem with all my bikes...
    I guess the bikes can't handle my power seriously
    24/02/2008: my first drive in a corrado 16, life is finally going somewhere...
    1/07/2008: first drive in a corrado vr6, life peaks here

    WWW.AUTOFANS.BE

  12. #12
    Join Date
    Apr 2003
    Location
    Porto - Portugal
    Posts
    5,593
    I think a Honda CRF 450 will do.
    Money can't buy you friends, but you do get a better class of enemy.

  13. #13
    Join Date
    Oct 2004
    Location
    Nottingham, UK
    Posts
    781
    I have a standard Specialized Hardrock Sport Disc and it's perfect for riding on and off road, for the price anyway. Check them out. It copes with off road riding pretty well
    My other signature has a V12

  14. #14
    Join Date
    Aug 2004
    Posts
    8,068
    Quote Originally Posted by Pinin View Post
    I have a standard Specialized Hardrock Sport Disc and it's perfect for riding on and off road, for the price anyway. Check them out. It copes with off road riding pretty well
    Hear, hear. I use one of those, and it's brilliant- I'm an amateur rider (at best ), and it's never let me down once.

    I had a Land Rover before that, and it was nowhere near as good. The Specialized is an excellent blend of quality and value.

    Kona's range is pretty cool, I've always been a fan of the Stinky.

  15. #15
    Join Date
    Nov 2006
    Location
    Aberdeen
    Posts
    2,975
    Quote Originally Posted by IWantAnAudiRS6 View Post
    Hear, hear. I use one of those, and it's brilliant- I'm an amateur rider (at best ), and it's never let me down once.

    I had a Land Rover before that, and it was nowhere near as good. The Specialized is an excellent blend of quality and value.

    Kona's range is pretty cool, I've always been a fan of the Stinky.
    agreed! My first purchased bike was a hardrock - just the job at the time. Kona are real cool, just a bit too pricey and heavy for my needs. I would definately recomend the hardrock disc or an entry level rockhopper as a starter bike.
    autozine.org

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Carrera GT drifting on mountain road.
    By McReis in forum Multimedia
    Replies: 43
    Last Post: 05-02-2007, 05:09 AM
  2. Brembo brakes on a mountain bike!?
    By Gtek-i in forum Miscellaneous
    Replies: 28
    Last Post: 06-18-2006, 11:15 AM
  3. Biking
    By adamfraser in forum Miscellaneous
    Replies: 36
    Last Post: 09-28-2005, 05:26 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •